Oil pump tightening torque

[Gordonwimsey]

Hi. I have a 2012 2.2 with a CYCA engine.
I have searched relentlessly for the tightening torque for the banjo bolt on the oil pump return pipe. If anyone could help me with this, it would be dandy.

[metalworker0]

This is an online page from the workshop manual-

Note; workshop manual not often accessible or searchable..just searchable via google image search --- sometimes--- they let you see selected pages, hoping you'll buy

anyhow the torques are here ,..hopefully

think it may be instruction number 15

note carefully the other instructions about measuring

have a look yourself ..after setting cookie preferences


https://workshop-manuals.com/ford/trans ... ly/engine/

all the best.mark

[Gordonwimsey]

Hi Mark.
Thanks for your reply. Have checked detail but only shows the four bolts for the actual pump and pick up pipe itself, but not the banjo bolt on the return pipe on the right on my image. As this is a hollow bolt i didn't want to shear it. I may have to add a little loctite to the thread and torque to 6nm.
Regards. Bill

[metalworker0]

Here: land rover defender manual . same engine. you may find the detail in that. .

looks a lot better than the ford one ..no stupid blue diagrams ..more detail

but no quick index

so once down loaded and opened up, search within by typing "oil pump" etc

how to get it ...don't view online ..download the entire pdf - over 1200 pages

note: tick box next to file named "workshop manual" ...look at the top and press down load

2007 on

https://onedrive.live.com/?authkey=%21A ... 9C85C7C171


for you 2012 on

https://onedrive.live.com/?authkey=%21A ... 9C85C7C171

if someone can store these manuals online ..just in case they disappear ..then do it edit the pdf so it's just the engine bit.

all the best.mark

[MinorMatt]

Here: land rover defender manual . same engine. you may find the detail in that. .

looks a lot better than the ford one ..no stupid blue diagrams ..more detail

but no quick index

so once down loaded and opened up, search within by typing "oil pump" etc

how to get it ...don't view online ..download the entire pdf - over 1200 pages

note: tick box next to file named "workshop manual" ...look at the top and press down load

2007 on

https://onedrive.live.com/?authkey=%21A ... 9C85C7C171


for you 2012 on

https://onedrive.live.com/?authkey=%21A ... 9C85C7C171

if someone can store these manuals online ..just in case they disappear ..then do it edit the pdf so it's just the engine bit.

all the best.mark

The full links haven't been posted....