*NOW BOOKED FOR 2026* Transitmania 17 @ Santa Pod 17th to 19th July 2026 *ALL DETAILS HERE*


transit clutch cant get biting point

Use this forum to post technical questions & problems about any Transit

Moderator: Luke

transit clutch cant get biting point

Postby thomasturbo » Sat Mar 13, 2010 11:11 pm

i have a transit 100 lwb 1999 2.5 td when i go to take away the van always shudders untill clutch if fully up also cant keep it on a hill with the biting point the clutch isnt slipping and gear change is smooth

is it normal for the engine to make a whistling noise when driving

any help will be great
thomasturbo
Newbie
 
Posts: 8
Joined: Sat Mar 13, 2010 10:52 pm

Re: transit clutch cant get biting point

Postby AndyG » Sun Mar 14, 2010 12:48 am

Sounds like the clutch may be contaminated with oil, possibly from the crankshaft rear oil seal :?:

Whistling noise if very mild, is normal, if not then possible loose/split turbo hose or fan belt slipping :?:
Very difficult to say without hearing it :|
Image
Ford Transit 120 TDI EPIC Automatic. 0-60 in a leisurely and smooth 12.7 seconds and 1/4 mile in 19.1 seconds. Now where's all these faster? manual Di s?
User avatar
AndyG
Site Admin
 
Posts: 27833
Joined: Sun Mar 12, 2006 1:14 am
Location: West London

Re: transit clutch cant get biting point

Postby flyingclutchman » Wed Mar 17, 2010 1:54 pm

Mk 4/5 transits are very prone to clutch judder. Changing the clutch usually fixes it. Obviously check for weak mountings, oil contanimation etc., but usually a new clutch sorts it. That's why they put DMFs on mk6s!
flyingclutchman
Transit Aficionado
Transit Aficionado
 
Posts: 195
Joined: Wed Feb 24, 2010 8:34 pm

Re: transit clutch cant get biting point

Postby darkbluevanman » Wed Mar 17, 2010 7:03 pm

flyingclutchman wrote:Mk 4/5 transits are very prone to clutch judder. Changing the clutch usually fixes it. Obviously check for weak mountings, oil contanimation etc., but usually a new clutch sorts it. That's why they put DMFs on mk6s!


Thought dual mass was an aid to performance?... and something new for manufactuers to rip yours eyes out with!
User avatar
darkbluevanman
Transit Extremist
Transit Extremist
 
Posts: 15903
Joined: Sat Dec 08, 2007 9:28 pm
Location: West Yorkshire

Re: transit clutch cant get biting point

Postby stu0500 » Wed Mar 17, 2010 7:11 pm

If your van is a mk5 have you checked the clutch ratchet mech?
2012 vivaro 2.0 CDTI 140 bhp sortimo racking elec pack
2016 Transit custom Limited 155 ordered (with toys)
2013 Audi S4 B8.5 pearl black
2015 seat Leon FR 184 TDI Pearl black
stu0500
Transit Aficionado
Transit Aficionado
 
Posts: 293
Joined: Sun Oct 18, 2009 8:16 pm
Location: Middlesbrough

Re: transit clutch cant get biting point

Postby flyingclutchman » Wed Mar 17, 2010 7:27 pm

darkbluevanman wrote:
flyingclutchman wrote:Mk 4/5 transits are very prone to clutch judder. Changing the clutch usually fixes it. Obviously check for weak mountings, oil contanimation etc., but usually a new clutch sorts it. That's why they put DMFs on mk6s!


Thought dual mass was an aid to performance?... and something new for manufactuers to rip yours eyes out with!


Certainly is something to rip your eyes out with, but they do smooth out vibration until they go wrong, then it's your head that vibrates with the cost of replacing them!
flyingclutchman
Transit Aficionado
Transit Aficionado
 
Posts: 195
Joined: Wed Feb 24, 2010 8:34 pm


Return to Technical Problems & Questions



Who is online

Users browsing this forum: No registered users

This site contains affiliate links for which we may be compensated.