MK6 MWB HI Roof fit out

[chimplad28]

Hi all.
I bought a mk6 2.3 petrol with lpg fitted to it.
Pretty basic inside but am going to turn it into a carpet fitter's van.
Here are a few original pics from when I first got it...

[chimplad28]

Here is the bulkhead, then removed bulkhead.
I removed the gas tank from the passenger wheel arch and found that it was falling to bits so we welded it up.
Have added a 95 litre donut tank as well as the 90 litre cylinder tank. The cylinder tank is directly behind the driver seat with the donut in front of it.
Boxing in all down the right hand side so it covers tanks and will contain boxes of gripper and threshold strips plus a couple of tool boxes.
Have boxes in the pass wheel arch and plywood to the surround. Have started covering that half of the van now

[chimplad28]

The passenger seat will be sat on quick release legs and rails.
I aim to pull the dash out and spray it once the rear is fitted out and completely carpeted.