Lucifer in progress

[ned]

Yes I have tidied out the van but it looks no bloody different 6 bin bags full or was it 8 of crap for the tip, the younger two cleaned the van and my eldest polished half the van N

[dirtydog]

Hahaha I have to completely empty mine out when it goes in for repair

[ned]

Had a busy day today, been to the junkyard and got injector leak back pipe, injector/rocker cover seals and a pas/water pump belt cover

WP_20170823_12_20_33_Pro.jpg

Then the injector overhaul started with the help of a vice

WP_20170823_13_19_14_Pro.jpg

Removed the tip, sprayed cleaner through the nozzle and swapped the control bits over with the new ones (I did 1 injector at a time and put it back in)

WP_20170823_14_34_58_Pro.jpg

All 4 done, cleaned and back in the van

WP_20170823_16_15_59_Pro.jpg

WP_20170823_16_16_04_Pro.jpg

Now it wont bloody start, got fuel to all 4 injectors, fuel filter is full so I have either done something wrong or broke my van, trouble is my son moved the injectors with my valve things in and now I don't know which one was for each injector Bloody typical, bloody ford. N

[bigjohnthomas]

PhwOOOORRRRwwwwwwOOOOOOOrr love that vice

[ned]

25 sovs bargain from the local tools place. N

[ned]

Split the headlights and gave them a good clean in and out, also added some red LEDs (for show only)

[ned]

Scrubs up well, washed and polished while charging the battery, also cleaned where the headlights go

[karl]

so is it running now

[ned]

so is it running now

It was but I had a leak and now its not starting again, think I have an air in the system. N

[bambi mk 1]

Need to do a bit of badge engineering when you get it sorted Ned
You could let it be your badge of honour
Just pray its not this one you end up with

[ned]

Now its back up and running I can carry on with the modification

First priority is to get the bloody wheels balanced, it shakes like a shitting dog at 50 - 60 mph

Need to stick a post it note on the windscreen to remind me I have another gear, 5th

Now I have my vice I might change the drivers side front wheel bearing,
passenger side rear wheel bearing and passenger side front abs sensor both need replacing

I have been looking at that vinyl wrap stuff for the blue parts of the dash and maybe the carbon fibre effect stuff for the door cards, is it easy to use.

[loot]

It goes on nicely then when the temperature changes is goes sh*t and any convex shapes you did it stretches and looks shite:-( that's the 2d 5m for 15 pounds stuff tho Lol.

3d or 4d might need more heat?

[bigjohnthomas]

I have yet to witness a dog shake when it shits

[ned]

It goes on nicely then when the temperature changes is goes sh*t and any convex shapes you did it stretches and looks shite:-( that's the 2d 5m for 15 pounds stuff tho Lol.

3d or 4d might need more heat?

I have been looking at the 3D stuff, don't know what the bloody difference is though, I'll have to order some at 3am when I cant sleep Where do you purchase the 2D stuff that'll do for the door cards. N

[ned]

I have yet to witness a dog shake when it shits

Funny enough I have never witnessed that either, its one of them saying my dad used to say along with,
Its as long as it is broad,
Stop crying or I'll give you something to cry for,
Ask your mother,
Av you got my psv badge again,

And my favourite,

Who the f*** gave the dog sprouts N