My MK3 cosworth

[AndyG]

If they pull out in front of you and they are too slow and you hit em, its their fault 100%.

Wrong

If you hit them in the back it is YOUR fault

[Guy88]

Havent heard anththing from him. he was getting some quotes and letting me know. all hes worried about it the car being written off. so i decided if it has bent the floor i will buy it for what it is insured for and break it for bits

As for stopping quicker they are the tyres that were on the van

[madmark]

nice wheels! as andyg says they look great!

[Granadadriver]

Looks great! Are these Mangels or Weller wheels?

[stevo]

If they pull out in front of you and they are too slow and you hit em, its their fault 100%.

Wrong

If you hit them in the back it is YOUR fault

They should judge the speed and distance they need to pull out, if they cant do it then hows that your fault?

[AndyG]

If they pull out in front of you and they are too slow and you hit em, its their fault 100%.

Wrong

If you hit them in the back it is YOUR fault

They should judge the speed and distance they need to pull out, if they cant do it then hows that your fault?

Going too fast and not paying attention
If someone was that slow pulling out, you would have hit the front of their motor if you were that close, or you would of had time to avoid them.
You'd have to be breaking the speed limit to hit them in the back

[Guy88]

Well still no claim

Pinto is out prop is being a c**t its the only thing holding the box in. engine mouns just need welding. flywheel should be here tomorrow

So the big day is saturday engine in and running by sunday.





dont hold me to this

[AndyG]

prop is being a c**t its the only thing holding the box in.

U/J bolts

[madmark]

sunday!

[Guy88]

It is unbolted but the flange is rusted together. Big hammer time

[Guy88]

Whilst i was dodging the rain today i got the tyres put on the MK3 rims so i can now move the van

I got one of the engine mounts welded and the other tacked. Just need some rubbers from a MK5

But i sill cant get the prop off Might unbolt it from the axle and take it all out

Heres the L/H mount just need a tidy up and it can go back on

[Guy88]

Well. I have been talking to a lecturer at college today and i got him to say yes to welding the manifold

AND


I spoke to another lecturer who offered if i bring the van into college i can get it put on a rolling road and dynoed for free

[Guy88]

Finally got the prop off. it was well rusted


And here it is



Engine and box went in together had to remove the g/box cross member

[Luke]

getting there

new rank now

[stevew]

Nice one!
It's going to be worth it in the end!

Steve