Ford Transit Forum

by **madmark** » Wed May 30, 2007 4:32 am

they all do it even the mk1 i noticed the otherday has got water in the pinto airfilter bolt holes! :shock:

mind you with the amount of rain we have had i am not supriesed!

by **Guy88** » Fri Jun 01, 2007 8:01 pm

Got me wheels back

And started to paint them

by **Guy88** » Sat Jun 02, 2007 7:51 pm

Woooohoooooo

All the structural weldings done

Just got to do the back brakes and a few lights

wheels are not so good. the laquer has reacted with the paint so i got to start over

And a slight hitch with the bumper ine the mounts on the side are fooked and its flapping in the wind now held with cable ties :oops:

Had her running sweet as today. ISCV is now disconnected and the idle is now adjusted manually just hope it dont go into limp home now

Couple more pics

This one has half the guard fitted (still needs chequer plating

by **Guy88** » Tue Jun 05, 2007 8:30 pm

MOT is thursday 3pm

6 things left to do
1. Rear light
2. handbrake
3. rear brake application
4. Change numberplates
5. Steering UJ
6. Bumper

Will a cable tie holding the end of the bumper up be a fail. :?:

(stopping it flapping in the wind)

by **custom** » Tue Jun 05, 2007 8:33 pm

a cable tie will be fine m8 good luck 4 the mot

by **Guy88** » Tue Jun 05, 2007 8:35 pm

custom wrote:a cable tie will be fine m8 good luck 4 the mot

Cheers mate.

Its still 6 things thou as i forgot the ball joint :shock:

by **Guy88** » Wed Jun 06, 2007 10:37 pm

Got the brakes, handbrake, ball joint, temporary not so loud exhaust done today

sounds crap now

16hours and 22 mins left :twisted:

by **AndyG** » Wed Jun 06, 2007 11:13 pm

Can't wait :!:

by **transitgeoff** » Wed Jun 06, 2007 11:16 pm

Guy88 wrote:

is that your bumper laying next to the van awaiting fitment :lol:

by **AndyG** » Thu Jun 07, 2007 12:01 am

transitgeoff wrote:is that your bumper laying next to the van awaiting fitment

He'll be taking that with him :wink:

(he may want to use it on the tester :!:

)

by **Guy88** » Thu Jun 07, 2007 8:38 am

Andyg wrote:
transitgeoff wrote:is that your bumper laying next to the van awaiting fitment
He'll be taking that with him (he may want to use it on the tester )

I will take it with me

To keep the ar*e on the floor :lol:

by **Guy88** » Thu Jun 07, 2007 11:09 am

I wont take it with me

Shes dropped a shell. VERY bad metalick knock at tickover. coes when revved. Just about to remove sump. If its major she's for sale

:cry: