toms mk7 sport rep

[glenandemm]

one of the nicest transits ive seen pal, can i ask where you got the rear lowered leafs from and how did you lower the front end, springs? im thinking about dropping my strut through the hub a tad more!

[Perfectpaintwork]

thanks for all the comments, it did turn out nice. sold it now as I just moved to Australia so time to start again will post pics of new van shortly its a 2010 swb 115 280 6 speed needs a bit of bodywork, just started ordering some bits from uk as not much out here.

[Perfectpaintwork]

one of the nicest transits ive seen pal, can i ask where you got the rear lowered leafs from and how did you lower the front end, springs? im thinking about dropping my strut through the hub a tad more!

the front was on custom made springs by coilsprings.co.uk cost about 140 delivered
rear where straightened by owen springs
I recommend both companys they were very good

[tourneo newbie]

What wheels are those they look like bmw ones? If so did you use hubcentric adapters to fit them

[Perfectpaintwork]

What wheels are those they look like bmw ones? If so did you use hubcentric adapters to fit them

they are 20" jaguar kasuga alloys, front hubs were redrilled and rears were on hub adaptors

[Killiestu]

What wheels are those they look like bmw ones? If so did you use hubcentric adapters to fit them

they are 20" jaguar kasuga alloys, front hubs were redrilled and rears were on hub adaptors

Old post but anybody know how thick the hub adapters were on the rear? Is the front hub re-drill straight forward enough?
Cheers

Sent from my SM-G950F using Tapatalk

[Perfectpaintwork]

What wheels are those they look like bmw ones? If so did you use hubcentric adapters to fit them

they are 20" jaguar kasuga alloys, front hubs were redrilled and rears were on hub adaptors

Old post but anybody know how thick the hub adapters were on the rear? Is the front hub re-drill straight forward enough?
Cheers




Sent from my SM-G950F using Tapatalk

10mm rear hub adaptors
Just buy new set of front hubs and drill them

[Killiestu]

Thanks for the reply.

10mm !!! Is that even safe? Seems very thin , I've never used a hub adapter so I might be getting it wrong

Sent from my SM-G950F using Tapatalk

[Shaun306]

Did you ever complete one in Australia ?

[ossie cossie]

nice van