The evidence,
Pics cos it did happen
No, I've never been able to raise it higher than the 215/75 in the list or even under the manually set diameter option oh well...Cider Andy wrote:Looking good Iain. In particular the colour coded 3.2 front bumper.
Did you manage to find a wheel/tyre size combination in IDS to get the speedo reading close?
Preciselyandz327 wrote:Like thi pic says what the fook is that on yer hub???? Hub centric adapter on the hub and not welded to wheels ??
ANDZ
Did you make or buy them??Airthies wrote:They stick and screw to inner lip, but I've not taken backing off the sticky stuff yet, as wasn't sure about them completely at the time.
Sent from my A55ho11 using Crapatalk
Got the spigots from a guy on FB but got him to make them out of 8mm and larger DIA than normal to fit my specific wheels, then drill and screwed to front hub with M6 Allen screws but ended up making my own top hat style for the rear so there's a lip behind the wheel and then a spacer shim for behind the wheel so the bolts clamp the rim face directly to it since the outer shoulder on the rim is a larger diameter than the halfshaft. I should make two more for the front but the rim shoulder sits ok on the hub. So it's not going anywhere even with the punishment it gets from me.andz327 wrote:Did you make or buy them??Airthies wrote:They stick and screw to inner lip, but I've not taken backing off the sticky stuff yet, as wasn't sure about them completely at the time.
Sent from my A55ho11 using Crapatalk
Has yer ali sheets been dropped at Neds??
ANDZ
Return to Members Transit's - Progress Reports!
Users browsing this forum: No registered users
This site contains affiliate links for which we may be compensated.