its a 2.4 rwd swb 330 on an 09 plate , previously owned by an agricultural machine company ,
first job was to remove all the wood paneling and clean the grease and cr*p off the walls ,also take out the 40 or so rusted self tappers ,
one week later ,... took off the drivers step cover and jack holder to reveal mud mud glorious mud ,also drilled a drain hole in the step floor ,
Wk 3 .. removed passenger step cover , more mud and water , drilled another drain hole ,
took " Nell " to the garage for oil change /filter and opportunity to get underneath and see it properly , thankfully all good , small weld repairnear o/s spring hanger thats all .
changed the air filter , so old it was breaking up !! , cut out the floor mat , soaking wet and smelt like ugh ! also removed the steel bulkhead and cut it in half then replaced the lower half .
constructed a bed to fit across the van , i stay in her 4days a week as i work away from home , for a trucking company .