Ake's Connect

[ake]

Heres my toy Transit.

Its a 75ps TDci 200L so it has no toys But I'm working on that

So far its been sign written




Lined and racked in the back




240v invertor in the back for charging drills etc



Parrot bluetooth kit fitted



2 150mm Alpine speakers



I have also fitted some seat covers and Ford mats.

To come:

K2AKE number plate
Remap by Vantuner
Electric Windows
Heated Front Screen and Mirrors
Some decent seats

[bigjohnthomas]

biomass and solar the future?
There's a few fields of elephant grass appeared round here

[Honey monster]

Where did you take the feed for the inverter from and what size wires did you run.
No map gas for your torch up there or just to expensive.

[Boo-radley]

That reg almost reads Poxy,I'd leave it on..

[ake]

Where did you take the feed for the inverter from and what size wires did you run.
No map gas for your torch up there or just to expensive.

I just used the wires for the 12v socket
Primus is cheaper, more environmentally friendly cos the bottles are recycled and does the job for me

8) biomass and solar the future?
There's a few fields of elephant grass appeared round here

We do quite a bit of solar and biomass now

That reg almost reads Poxy,I'd leave it on..

All the more reason to get rid

[transitandy]

nice van

[Altransit]

Nice wee van, but the camera is rubbish

[winterheating]

very nice van.

And even nicer setup in the back. One good thing about smaller vans like that, with the side and back doors you can reach everything without having to climb in.

i always thought about going onto the primus gas, for the cheapness of it, but not if its not as hot/quick as the Mapp gas.

Do the newer connects come as 75ps option now thought tdci was 90 or 110ps

[belly]

Nice go kart Have to keep that tidy

[ake]

It has now been remapped by mail by Vantuner But you have to remove the front wing to remove/refit the ecu.

I will some better pictures, and yes the new ones are still available as 75ps.

The primus gas works fine for me and the rest of our guys, well worth £10 for the brass adaptor, and it works just as well on normal size fittings, struggles once you get to 54mm, but we usually use mappress above 28mm