Good evening gents, I have finally purchased my first transit and need to replace the roof gutter around the rear of the van. The factory gutter is not a simple folded section and has a curve up the side and swage along the bottom. Does anyone have any tips on how they have successfully remade the gutter section to include these features?
Any pictures of how you have done the repair would be great.
TIA
Transitmania 12 @Santa Pod 15th to 17th May 2020
Mk1 transit gutter rot
Moderator: Luke
3 posts
• Page 1 of 1
Mk1 transit gutter rot
by blue74 » Thu Apr 01, 2021 12:34 pm
- blue74
- Newbie
- Posts: 5
- Joined: Mon Feb 18, 2019 11:57 pm
Re: Mk1 transit gutter rot
by Ralph.9 » Fri Apr 02, 2021 6:59 am
I might have some used gutter sections, when I replaced mine I had to remove the roof skin.
You do not have the required permissions to view the files attached to this post.
- Ralph.9
- Transit Aficionado
- Posts: 482
- Joined: Sun Aug 28, 2011 9:53 pm
- Location: Holland on sea Essex
Re: Mk1 transit gutter rot
by blue74 » Thu Apr 08, 2021 5:13 am
Thanks Ralph, I wondered if that may be the best option. Looks like I have a lot of welding to do.
- blue74
- Newbie
- Posts: 5
- Joined: Mon Feb 18, 2019 11:57 pm
3 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users