Mk1 brake servo

[greek]

Hi Guys been surfing for a Brake servo Mk1 found nothing anyone have any alternatives that might fit. looked at LDV sherpa found a couple everything else same as Transit so thinking maybe these will be. Heads up on anything be good Thanks

[Mr twin choke]

Have you tried; https://www.brakesint.co.uk/contact_bolton.html

They had no problem supplying me with a master cylinder and rear wheel cylinders so are worth contacting. I have a MK2 servo ready to fit onto my MK1. It is a bit larger and after a test fitting found it fits straight on. This may be another option for you.

[greek]

Yes i have used that company a few times forgot will look again . My problem might be with a Mk2 one if there a lot bigger i have a Leisure battery Servo side so limited on space & not a lot of Mk2 about either Thanks though will keep looking.

[Neil]

mk 2 servo will fit on mk 1 you can always get your servo rebuilt ,,,,, the bendix on the mk 2 is slightly larger

[Ollie]

https://www.classiccar-brakes.co.uk/about-us/

These guys talk sense for rebuilding old units, I presume you have a core unit to rebuild? mine will be going there next week!
Ollie

[greek]

Sorted guys new old stock for LDV just a shorter push rod easy fix

[Ollie]

Before i forget, when I picked up my rebuilt mk2 master cylinder from contract auto, they mentioned that the mk1 servo shares lots of bits with dolomites for which they rebuild servos, there is apparently a non available fragile plastic cup around the push rod so dont bust that, but they are working on remanufacturing them so if you need bits then hopefully it'll improve soon.