*NOW BOOKED FOR 2026* Transitmania 17 @ Santa Pod 17th to 19th July 2026 *ALL DETAILS HERE*


switch me back on!help!

Transit Mk1 & 2 Forum. All Transits 1965 - 1986

Moderator: Luke

switch me back on!help!

Postby hippy » Tue Dec 16, 2008 1:21 pm

hiya...in australia, in search for an indicator switch/horn high beam arm thingo... last time I took my van in to a mechanic they broke it (just the indicator ) as they forced it- I think because there is only one light on the dash on the left that flashes for both ways so they thought they had to push it further to get it to flash on the right or something! :? any ideas that won't cost an arm and a leg? :D
hippy
Transit Addict
Transit Addict
 
Posts: 20
Joined: Tue Dec 16, 2008 12:38 pm
Location: western australia

Re: switch me back on!help!

Postby cartooner » Fri Dec 19, 2008 1:47 pm

Hi, these things are fragile and break easily ( some plastic thingy inside will be broken). I have a spare one but sadly that is for a RHD. You can buy them new from http://www.oldcars.de

Here's a link:

http://www.oldcars.de/shop/index.htm?f= ... ic&exact=1

good luck

edit: When You click 'Home' You can set the language to English.
cartooner
Transit Aficionado
Transit Aficionado
 
Posts: 139
Joined: Tue Feb 19, 2008 2:13 pm
Location: Netherlands

Re: switch me back on!help!

Postby hippy » Fri Dec 19, 2008 2:31 pm

hiya.
thanks for that...have checked them out before. thought $100++ euros was a bit much plus postage to oz.or maybe I'm dreaming!
whats RHD? is that right hand drive?
my brother has a'69 transit but the plug on the switch doesn't fit. apparently the mk2 switch matches but has a shorter arm.I have pulled it apart and it is the delicate plastic thingy!
cheers. :)
hippy
Transit Addict
Transit Addict
 
Posts: 20
Joined: Tue Dec 16, 2008 12:38 pm
Location: western australia

Re: switch me back on!help!

Postby madmark » Fri Dec 19, 2008 3:22 pm

you can use a mk1 stalk for both sides with a little bending :wink: most have the plug on the end that will be difrent ,this you just cut off and resolder your original plug on the end! :wink:
madmark
Transit Extremist
Transit Extremist
 
Posts: 15467
Joined: Thu Mar 03, 2005 4:29 am

Re: switch me back on!help!

Postby AlanN » Fri Dec 19, 2008 4:28 pm

In Australia, they are right hand drive!!!! :roll:
Ford Transit MK3 1989 2.8i V6 Auto Member of the MK3 Massive

R.I.P Kirk Bacon aka Eugene Speed
AlanN
Site Moderator
 
Posts: 14176
Joined: Mon Jan 01, 2007 1:23 pm
Location: Rayleigh Essex

Re: switch me back on!help!

Postby cartooner » Fri Dec 19, 2008 11:32 pm

Sorry, I ment the spare one I have is LHD ( left hand drive), so it's no use to You. The one from the link is RHD ( Right hand drive).
cartooner
Transit Aficionado
Transit Aficionado
 
Posts: 139
Joined: Tue Feb 19, 2008 2:13 pm
Location: Netherlands

Re: switch me back on!help!

Postby hippy » Sat Dec 20, 2008 3:01 am

cheers... thanks for clearing all that up....I thought RHD must be something i was missing as yes we drive on the right side over here..alrighty.. will try poaching my brothers switch and solder it on to my plug. thanks guys!
hippy
Transit Addict
Transit Addict
 
Posts: 20
Joined: Tue Dec 16, 2008 12:38 pm
Location: western australia

Re: switch me back on!help!

Postby madmark » Sat Dec 20, 2008 6:13 am

cartooner it wont make any difrence it will just bend down towards your nee if you fit the older one ,just bend it up and it will work fine! :wink:

if you are clever enouph you can turn the stalk the correct way i have done this many time in the past! :wink:
madmark
Transit Extremist
Transit Extremist
 
Posts: 15467
Joined: Thu Mar 03, 2005 4:29 am


Return to Mk 1 & 2



Who is online

Users browsing this forum: No registered users

This site contains affiliate links for which we may be compensated.