Front spring hangers MK2

[karelwj]

Hello, i'm karel from the Netherlands and i am looking for:front spring hangers for my transit 1980 MK2.I understand that hangers of A MK3 also fits(with sam justifications)sombody ther kan help me?(sorry for my poor English)greats from Karel

[cartooner]

Just sent a PM with a telephonenumber in the Netherlands.

[redeemer]

If you are skiled enough and have the right tools, then you can fabricate them from 1.5mm or greater sheet steel. First take out the outline on a piece of cardboard and then after cutting produce the lip on a vice. Here some of my pics. still have to do the other side

[AndyG]

If you are skiled enough and have the right tools, then you can fabricate them from 1.5mm or greater sheet steel. First take out the outline on a piece of cardboard and then after cutting produce the lip on a vice. Here some of my pics. still have to do the other side

You make it look so easy

[redeemer]

[jerry2]

I have an extremley crusty and flaky front end .
My hangers are knackered too
Looks like good advice about the hangers as unable to track any down.
At the moment cutting front crossmember welding patches out and starting again so I will try fabricating these too.
Are they strong enough though?

[Luke]

how about these viewtopic.php?f=18&t=32526

[redeemer]

My advice:
better if you find some mk3's as luke sugested
or
if you will fabricate them, I used 1.5mm sheet steel, and made the hanger from two sheets on one another spoted together.
If I will do it now , I would go for a single sheet perhaps 3mm or thicker, so to avoid having 2 sheets spotted together , between which moisture can form starting rust.

[cartooner]

They cost money, but are avialable:

http://www.oldcars.de/shop/index.htm?f= ... ic&exact=1

or:

http://www.oldcars.de/shop/index.htm?f= ... ic&exact=1

No I still don't have any shares!

[jerry2]

been quoted £38 each plus vat. Bit steep but only have to buy them once I hope (mk3)

[redeemer]

Make them yourself! They would be better out of 3mm sheet