What brakes do I have

[Shed_Transit]

Hi all,

I have an ex-Malta Mk1 twin wheel bullnose and trying to find out what brake calipers / master cylinder and servo I have, can anyone identify what I have fitted (not sure whether it's Mk1, I've been told it's mk2 kit) I need to sort either a rebuild or new calipers / master cylinder - so any advice on parts suppliers would be great.

Pictures;

Transit M_Cyl1.jpg

Transit Calipers2.jpg

Transit Calipers2.jpg

Thanks,

Steve

[Soren]

Hi
Here is an link where you have a chance to find what you need
Cheers Søren
https://www.motomobil.com/my-ford,2188.html

[Neil]

servo looks single wheeler

[conrod]

4 pot calipers with solid discs obviously, and that servo looks small like Neil said! AP/Lockheed master cylinder, and there are many different bore sizes available for this, so best bet is to remove and measure before ordering a new one. From memory I think the 4 pot calipers all shared the same piston size, 41mm ????? The brake discs are the same as any other Transit with solid discs, ie. all Mk2's.

[Shed_Transit]

Thanks Guys, as the calipers are knackered I'm up for a replacement what would you recommend as a straight forward bolt om replacement? I've read on here that LDV convoy calipers fit? What year - as I have a late 02 or 03 scrapper in which I removed the duratorq to install in this mk1. What master cylinder / servo would you suggest?

Many thanks for the advice!

Steve

[Neil]

the biggest bore for the twin wheeler think its 23 mm Lockheed but some later ones had a bendix servo and cylinder either servos are hard to find new but if you find a secondhand one they can be re conditioned