Differential wanted

[doggypaddle]

Hi all

I need a diff for my 100L type 34? (square axle) ideally 4.11 ratio or 3.5/3.9 Zodiac.
Currently have a 4.56-1 which is quite noisy. would consider same if its cheap and close ish to home to collect but ideally as its going to be a camper want to up the gearing a bit. its a 2.0 pinto. I think a 4.11 or 3.9 and MT75 would be a reasonable combination.
Maybe 3.5 would be too tall?
cheers in advance

[j6393]

If you are in Australia I have a 4.0 diff to suit 6 stud wheels for a Mk1 or Mk2 to go to a good home - no cost except you would have to arrange the transport.

I bought this a few years ago for my Mk1 but then didn't think the V4 would be able to cruise up some of the hills here.

[doggypaddle]

If you are in Australia I have a 4.0 diff to suit 6 stud wheels for a Mk1 or Mk2 to go to a good home - no cost except you would have to arrange the transport.

I bought this a few years ago for my Mk1 but then didn't think the V4 would be able to cruise up some of the hills here.

Thanks for the offer but i need a type 34 diff for 5 stud wheels, and i am in south wales UK.

[00353theking]

If you are in Australia I have a 4.0 diff to suit 6 stud wheels for a Mk1 or Mk2 to go to a good home - no cost except you would have to arrange the transport.

I bought this a few years ago for my Mk1 but then didn't think the V4 would be able to cruise up some of the hills here.

Hi would the 4.0 diff you have fit a vg 6 stud wheel 1998 ?
If it would id be interested in buying it from you,
Thanks
Gerry

Sent from my SM-G965F using Tapatalk

[MinorMatt]

What age is your vehicle? For the 5 stud the tallest ratio ever fitted was a 3.7, they are super rare and I have never seen one. I have only seen 3 x 3.9:1. From 1991 onwards the diff changed and the tallest is a 4.11 (unless you get the spanners out and swap bits around)

4.0 was never available for the 6 stud axles, tallest was 4.63. Does it fit the standard axles, or is this an Australian variant?

[00353theking]

Year 1998 2.5td
Australian van lwb shr
6 stud , 15" inch single wheel,
225 /70 r15 tyres,

Van revs to much on the motorway in fifth gear looking to reduce revs a bit if possible with diff change.

Sent from my SM-G965F using Tapatalk

[j6393]

Hi Matt
This 4.0 diff was commercially modified and is from a Mk1 or Mk2 and is complete with Ford Transit 6 stud axles, brakes and drums. Also 4 single 6 stud wheels to go with it.
Makers name is now illegible. I have counted the teeth on the pinion and crown wheel and it is 4.0.
Country out here is pretty flat except for a couple of really steep long hills and after buying it I didn't think my mk1 with a v4 would have enough grunt with a load on.
Happy to give it to anyone who can organise freight or pickup from Broken Hill.
J6393