*NOW BOOKED FOR 2024* Transitmania 15 @ Santa Pod 19th to 21st July 2024 *ALL DETAILS HERE*


2.4 York Bosch VM rotary pump plunger.

Transit Mk1 & 2 Forum. All Transits 1965 - 1986

Moderator: Luke

2.4 York Bosch VM rotary pump plunger.

Postby SuperBad » Wed Dec 30, 2020 4:59 pm

Good day fine forum folks!

Grumbling over my old MK2 bus restoration project.
Had planned to get it into a cramped workspace to get started on some dent removal, turns out I couldn't get it running safely due to the injector pump leaking...

Long story short, I managed to snap the plunger in two whilst dismantling - had to grit my teeth whilst holding back crocodile tears.
Before I go tearing into a neighbours DI 2.5 engine to see if the inline pump will fit my 2.4, is there any chance of procuring the plunger for this Bosch pump that I currently possess?

Appreciate any help.

photo6008237125289489579.jpg
You do not have the required permissions to view the files attached to this post.
SuperBad
Newbie
 
Posts: 3
Joined: Sun Feb 08, 2015 7:47 pm

Re: 2.4 York Bosch VM rotary pump plunger.

Postby dumper » Wed Dec 30, 2020 11:50 pm

The York pump was oil fed lubrication on the minimeck pump the di pump is lubricated by the fuel I think the Bosch was the same so I wouldn’t expect it to fit different mountings .
MK 8 L4 H3 Motorsport campervan
Past camper vans
1974 mk1 v4 with 2.0 pinto fitted
1986 mk3 2.5 di swb
1990 190 lwb 2.5 di
1998 100 lwb 2.5 di
2006 350 jumbo 135 tdci
dumper
Transit Extremist
Transit Extremist
 
Posts: 5438
Joined: Sun Jan 20, 2008 2:56 pm
Location: Lincolnshire

Re: 2.4 York Bosch VM rotary pump plunger.

Postby SuperBad » Thu Dec 31, 2020 12:42 pm

Interesting thanks.
I think I have a Minimeck on my boat engine (Ford Lehman), although that one has its own sump...
I'll keep looking for a Bosch plunger then. There seems to be a production facility in China at least. http://www.china-lutong.com/en/
SuperBad
Newbie
 
Posts: 3
Joined: Sun Feb 08, 2015 7:47 pm

Re: 2.4 York Bosch VM rotary pump plunger.

Postby dumper » Thu Dec 31, 2020 3:05 pm

Try PFJones or local diesel injection shop .
MK 8 L4 H3 Motorsport campervan
Past camper vans
1974 mk1 v4 with 2.0 pinto fitted
1986 mk3 2.5 di swb
1990 190 lwb 2.5 di
1998 100 lwb 2.5 di
2006 350 jumbo 135 tdci
dumper
Transit Extremist
Transit Extremist
 
Posts: 5438
Joined: Sun Jan 20, 2008 2:56 pm
Location: Lincolnshire

Re: 2.4 York Bosch VM rotary pump plunger.

Postby SuperBad » Sun Jan 03, 2021 7:49 pm

Cheers.
I'll try PFJones.
Diesel is going out of fashion up here in Norway, unfortunately.
The diesel shops that exist will charge me more than what I paid for the old bus in the first place.
SuperBad
Newbie
 
Posts: 3
Joined: Sun Feb 08, 2015 7:47 pm


Return to Mk 1 & 2



Who is online

Users browsing this forum: No registered users

This site contains affiliate links for which we may be compensated.