by dumper » Tue Sep 28, 2021 3:05 pm
Yes when we fitted new doors back then we put the quarter light and frame back in the door and put in the sliding window in the runners put the screws in and then fit the winder gear but you can put the sliding window in by just removing the other side short runner on the handle Side of the door they had a habit of the spot welds snapping off letting the runner fall into the bottom of the door and the window doing the same or just jamming up.
MK 8 L4 H3 Motorsport campervan
Past camper vans
1974 mk1 v4 with 2.0 pinto fitted
1986 mk3 2.5 di swb
1990 190 lwb 2.5 di
1998 100 lwb 2.5 di
2006 350 jumbo 135 tdci