Transitmania 11 @Santa Pod 17th to 19th May 2019


FT 2.5 TD (92) Feul Filter Change

Transit Mk3, 4 & 5(smiley front) Forum. All Transits 1986 - 2000

FT 2.5 TD (92) Feul Filter Change

Postby wonka » Tue Oct 09, 2018 12:24 pm

Hey Guys,
I couldn´t find an workshop guide or manual for my FT 100L. Is there one you can recommend?

I need to change the Diesel-filter and as i am a newbee i need some instructions by how to do it.
Can you help me?
I found some Information on this board. But I´m not sure whether i need to use an extra pump or if i could use the starter to fill the filter.
Do i need to vent the filter or something else? And how?
I hope you can understand my English, Greetings from Germany.
wonka
Newbie
 
Posts: 1
Joined: Tue Oct 09, 2018 12:06 pm

Re: FT 2.5 TD (92) Feul Filter Change

Postby V184 » Tue Oct 09, 2018 4:40 pm

Trennen Sie die Wassersensorverdrahtung, lösen Sie die Flügelmutter, die den Filter hält, und entfernen Sie sie. Übertragen Sie den Wassersensor, füllen Sie den neuen Filter mit Diesel und montieren Sie ihn neu
User avatar
V184
Transit Fanatic
Transit Fanatic
 
Posts: 2881
Joined: Thu Jun 08, 2006 8:16 pm
Location: You're right, V184 is an arsehole with a chip on his shoulder........

Re: FT 2.5 TD (92) Feul Filter Change

Postby Hondekop » Wed Oct 10, 2018 6:45 pm

V184 wrote:Trennen Sie die Wassersensorverdrahtung, lösen Sie die Flügelmutter, die den Filter hält, und entfernen Sie sie. Übertragen Sie den Wassersensor, füllen Sie den neuen Filter mit Diesel und montieren Sie ihn neu


Your commandment of the German language is simply amazing! :o
1992 MK4 LWB van, 2.5 TD 101 HP
Hondekop
Transit Addict
Transit Addict
 
Posts: 68
Joined: Thu Aug 08, 2013 12:47 pm
Location: Osnabrück (Germany)

Re: FT 2.5 TD (92) Feul Filter Change

Postby V184 » Thu Oct 11, 2018 9:48 pm

Danke dir
User avatar
V184
Transit Fanatic
Transit Fanatic
 
Posts: 2881
Joined: Thu Jun 08, 2006 8:16 pm
Location: You're right, V184 is an arsehole with a chip on his shoulder........

Re: FT 2.5 TD (92) Feul Filter Change

Postby bambi mk 1 » Thu Oct 11, 2018 10:17 pm

Hondekop wrote:
V184 wrote:Trennen Sie die Wassersensorverdrahtung, lösen Sie die Flügelmutter, die den Filter hält, und entfernen Sie sie. Übertragen Sie den Wassersensor, füllen Sie den neuen Filter mit Diesel und montieren Sie ihn neu


Your commandment of the German language is simply amazing! :o

Er lernte das Lesen seines Vito-Handbuchs :wink:
Theres the good guys,theres the bad guys but there only ever be one SPEED GUY
User avatar
bambi mk 1
Transit Extremist
Transit Extremist
 
Posts: 6019
Joined: Sat Nov 17, 2012 10:05 pm
Location: 24 Years living next door to Alice


Return to Mk 3, 4 & 5 - Second Generation Transits



Who is online

Users browsing this forum: Majestic-12 [Bot]