cooling hoses

[bazw]

hi all , does anyone have a pic or diagram of the hose layout for a nana motor
i need to work out where the heater and other hoses go to (things like where the return for the heater goes ,i can find the output next to the thermostat its the others i cant as i put the motor in without looking for it )

[Nighthawk]

on the bottom of the header tank, you should have a 3 way hose
end end goes to the heater rad, one end goes down to another pipe (metal) and the other end is on the header tank.

the other heater hose comes from the outlet on the front of the head, round the rocker cover and onto the heater rad.

the header tank also has 2 degas pipes, the left hand one goes to the connection in the top corner of the radiator, the other one goes to the thermostat housing.

top and bottom radiator hoses are straight forward.

on the back of the stat housing there is a pipe which drops down to the metal pipe on the back of the timing plate, where the other pipes are.

That should be them all covered