is it possable to convert to a up and over rear door

[cossy tranny]

as above to a swb 98 smiley if so what do i need to do this . any help would be great even if anyone hass the stuff for sale thanks

[Luke]

not done it, but the top hinges have a raised part on the side panels - this would need cutting off to look right!!

[cossy tranny]

im a panel beater / spray painter so this should be ok

[Luke]

i think this question has been asked before but ive done a search and i cant find it!!

[cossy tranny]

hopefuly somone wll know about it

[DOL]

MY MATE FITTED ONE TO MY OLD F REG S.H.T AND IT WAS FINE,ALL I DID WAS FIND A BREAKERS WITH ONE IN AND TOOK THE DOOR,GAS RAMS AND FIXING BOLTS THE LOCK CATCH PLATE AND CUT THE ROOF WHERE THE HINGES ARE(THE WHOLE BIT FROM LEFT 2 RIGHT) AND HE WELDED IT IN AND PLATED AND FILLED ABOVE THE DOOR,I WOULDNT MIND FINDING ANOTHER ONE FOR MY PRESENT VAN AS THEY LOOK SO MUCH BETTER THAN TWIN DOORS

[FredTransit]

No too sure about the Mk3, but on the Mk2 there is a panel the door mechanism attaches to, and the spring for the door is braced with it. I have seen this conversion on the Mk2 done by taking a slice of roof from the donor, dunno about the Mk3 though.

[madmark]

no fred the mk3 is on strutts! with abit of messing its possible! but you need to get all the parts of a scrapper!