help with 24v cosworth conversion

[24vMk2]

There's another problem with fitting the 24v in the transit, the drivers side downpipe trys going through the bellhousing!

Time for some interesting bends in your exhaust system!

[Luke]

There's another problem with fitting the 24v in the transit, the drivers side downpipe trys going through the bellhousing!

Time for some interesting bends in your exhaust system!

how you ggetting on with your conversion mate

[madvanman]

There's another problem with fitting the 24v in the transit, the drivers side downpipe trys going through the bellhousing!

Time for some interesting bends in your exhaust system!

do the manifolds from a non cossy 2.9 fit on the cossy lump?

[cossy tranny]

not got the conversion started yet its just in the plannin just got a fine of 700 pound for runnin red diesel this is why i thought of the conversion so am gonna run it on gas and some speed yee haa

as for the exhaust my good mate billy owns and runs free flow scotland dont know if anyons heard of it but he builds rite good stainless steel exhausts systems and is only 5 min from my house so im sorted !

iv been readin lots about the 4 11 :1 diff or 3 9 :1 diff does anyone know the exact year or type of van these out onto

[madmark]

for those diff ratio,s you need to be looking at mk2,minibus 12 seats 4 speed the 3.9 was fitted to some and 4.11 and also erly mk3 vans 2ltr 4 speed some of these were 4.11

[Luke]

as for the exhaust my good mate billy owns and runs free flow scotland dont know if anyons heard of it but he builds rite good stainless steel exhausts systems and is only 5 min from my house so im sorted !

thats handy could do with him making a patten! so he could sell "off the shelf" 24V tranny s/s exhausts

[cossy tranny]

the exhausts are good ul see one on mine soon al take photos when doin it

[24vMk2]

how you ggetting on with your conversion mate

Had to put a hold on the project for now!

Due to not being able to get my custom wiring loom made up in time, its gonna have my LPG powered essex in it for a while, give me more chance to get the parts together for the 24v.

I'm aiming to have the van at Ford Fair this year! and on the 0-60 sprint!

[cossy tranny]

ul se ma van this year big plans meet wi use at the shows hopefully

[PENDLEMOTORCYCLES]

Had the same problems with my exhaust. Fitted ambulance manifolds and remote oil filter housing works perfect, but im not sure if they`ll fit the 24v heads.

[cossy tranny]

what engine did u fif mate