Just replaced the h/blower switch from a none working blower only to find I can't get position 1 or 2 to work but position 3 does.
Any ideas?
*NOW BOOKED FOR 2026* Transitmania 17 @ Santa Pod 17th to 19th July 2026 *ALL DETAILS HERE*
Heater blower.
4 posts
• Page 1 of 1
Heater blower.
by Curry-er » Thu Jun 01, 2006 9:42 pm
'95 2.5 diesel (smiley)lwb/hi-top(transport for toy)
KTM 400 exc(toy)
KTM 400 exc(toy)
- Curry-er
- Transit Addict
- Posts: 69
- Joined: Thu May 25, 2006 4:40 pm
- Location: Villedieu,France(Dept.50)
by motorwise » Thu Jun 01, 2006 9:44 pm
it's usually the resistor but I have had a couple where the multiplug was burnt on the back of the switch but you've just fitted a switch so you will have seen that
Ford Transit - Backbone Of Britain
http://www.motorwise.net
if you want to get on in life, its not what you know, its not who you know, its what you know about who you know
http://www.motorwise.net
if you want to get on in life, its not what you know, its not who you know, its what you know about who you know
-
motorwise - Transit Extremist
- Posts: 7980
- Joined: Thu Apr 20, 2006 1:49 am
- Location: Bromley Kent
by Guy88 » Thu Jun 01, 2006 9:45 pm
2005 Ford F250 Super Duty
1992 MK3 ambulance
1980 A Series crew cab
1984 A series RB44
REMAPPED BY http://WWW.VANTUNER.COM HE IS THE WAY FORWARD
LIVIN' LOUD
1992 MK3 ambulance
1980 A Series crew cab
1984 A series RB44
REMAPPED BY http://WWW.VANTUNER.COM HE IS THE WAY FORWARD
LIVIN' LOUD
-
Guy88 - Site Moderator
- Posts: 17042
- Joined: Wed Mar 29, 2006 10:37 pm
- Location: Banbury, oxon
by Curry-er » Fri Jun 02, 2006 5:22 pm
When these things go wrong they go into serious melt-down!
Replaced the melted switch and replaced the lump of rust that used to be a resistor,I now have a blower with 3 speeds.
Many thanks for all your help.
Fuel level gauge was working before I took the bulk head out now it isn't....ho-hum off comes the bulk head again!
Replaced the melted switch and replaced the lump of rust that used to be a resistor,I now have a blower with 3 speeds.
Many thanks for all your help.
Fuel level gauge was working before I took the bulk head out now it isn't....ho-hum off comes the bulk head again!
'95 2.5 diesel (smiley)lwb/hi-top(transport for toy)
KTM 400 exc(toy)
KTM 400 exc(toy)
- Curry-er
- Transit Addict
- Posts: 69
- Joined: Thu May 25, 2006 4:40 pm
- Location: Villedieu,France(Dept.50)
4 posts
• Page 1 of 1
Return to Mk 3, 4 & 5 - Second Generation Transits
Who is online
Users browsing this forum: No registered users