*NOW BOOKED FOR 2026* Transitmania 17 @ Santa Pod 17th to 19th July 2026 *ALL DETAILS HERE*


fuel filter ---how to remove fuel lines from the housing

Transit Mk3, 4 & 5(smiley front) Forum. All Transits 1986 - 2000

fuel filter ---how to remove fuel lines from the housing

Postby koondaholaa » Sat Feb 27, 2010 3:23 pm

hey i am trying to change the fuel lines from the filter housing to the injector pump and from lifter pump to the fuel filter
they are the screw on kind but after i loosen and remove the threaded nut (SLIDE IT DOWN THE PIPE) THE TUBE DOESNT REALY COME OUT it spins around but when i pull it doesnt come out
ford dealer told me they should come out after you loose the nuts

any suggestion
also is the lifter pump an item that either work or doesnt at all . i have problem that when i fill the fuel filter with fuel and bleed the injectors i will start but then it dies and the fuel filter is empty . when i cranked teh engine without the fuel filter there was some fuel coming but i dont know if its from the return line maybe i coudnt really see that ?

many thanks i am stucked in Paris ( i love it here ) but now its time to go
does anyone can recomend cheap online source of the fuel lines as the dealer quoted me over 200 euro for the four of them between the lifter pump and fuel injection pump
thanks kamil
koondaholaa
Transit Addict
Transit Addict
 
Posts: 38
Joined: Mon May 26, 2008 11:45 pm

Re: fuel filter ---how to remove fuel lines from the housing

Postby dodgy01 » Sat Feb 27, 2010 8:41 pm

there is a o ring in there it would of gone hard and stuck in the threads
PULL HARDER
dodgy01
Transit Fanatic
Transit Fanatic
 
Posts: 2332
Joined: Wed Nov 04, 2009 8:32 pm
Location: braintree essex

Re: fuel filter ---how to remove fuel lines from the housing

Postby bazw » Sat Feb 27, 2010 10:11 pm

the site like it if you ask the same question in the first thread you started on it and not to start new ones

keep pulling and twisting and they will come out , if the pipe snaps you can then use long nose pliers to grip the end and pull it out or if you have to cut it off near the end and then use pliers , cut brass insert out of stub and after putting new seal on refit in end of pipe , you may have to warm end of pipe by dipping in boiling water to get the insert to go in
350L Series 56 plate
2.4 duratorq 115 ps
A.R. 4.27
User avatar
bazw
Transit Fanatic
Transit Fanatic
 
Posts: 2490
Joined: Sat Dec 10, 2005 11:46 am
Location: sunderland

Re: fuel filter ---how to remove fuel lines from the housing

Postby koondaholaa » Sun Feb 28, 2010 4:36 pm

ok sorry i understand about the new thread but i thought fuel lines fuel filter being another topic and was not getting replys on my old one even after reposting


ok i will pull the old fuel lines out and cut the fixtures off
i was thinking to just buy lenght of fuel line and repase the old fixtures -should work right ?
can you guys please tell me wheter you think the fuel pump (not the injector pump) could have occasional problems causing
occasioanl problems with fuel delivery or is it an item that either works or is dead ??
will help me save 80 euro to find out
thanks bunch kamil
koondaholaa
Transit Addict
Transit Addict
 
Posts: 38
Joined: Mon May 26, 2008 11:45 pm


Return to Mk 3, 4 & 5 - Second Generation Transits



Who is online

Users browsing this forum: No registered users

This site contains affiliate links for which we may be compensated.