*NOW BOOKED FOR 2026* Transitmania 17 @ Santa Pod 17th to 19th July 2026 *ALL DETAILS HERE*
Wheel Nuts
21 posts
• Page 2 of 2 • 1, 2
by frank_sumner » Thu Apr 27, 2006 8:25 pm
The only place I normaly go for a ride is on the outfit, but can't even do that as its at the Honda shop having a service and new alternator fitted. Going to be very light in the wallet shortly!
-
frank_sumner - Transit Aficionado
- Posts: 248
- Joined: Sat Jul 30, 2005 11:05 pm
- Location: Gloucester
by 100ps_drw_hicube » Thu Apr 27, 2006 8:31 pm
MrMPuk wrote:That's not a full set though is it! I got a price from Ford and had to sit down!
thats for 4 locking nuts then a few quid each per other wheel nut
You only need two tools in life: WD-40 and Duct Tape. If it doesn't move and it should, use WD-40. If it moves and shouldn't, use the duct tape.
-
100ps_drw_hicube - Transit Abuser!!
- Posts: 4118
- Joined: Tue Sep 06, 2005 6:25 pm
- Location: sussex
by 100ps_drw_hicube » Thu Apr 27, 2006 8:32 pm
frank_sumner wrote:The only place I normaly go for a ride is on the outfit, but can't even do that as its at the Honda shop having a service and new alternator fitted. Going to be very light in the wallet shortly!
yep honda = ££££££££ still nice bikes tho 
You only need two tools in life: WD-40 and Duct Tape. If it doesn't move and it should, use WD-40. If it moves and shouldn't, use the duct tape.
-
100ps_drw_hicube - Transit Abuser!!
- Posts: 4118
- Joined: Tue Sep 06, 2005 6:25 pm
- Location: sussex
by frank_sumner » Thu Apr 27, 2006 8:33 pm
Errrrr, had a look on Rally Design's website. But what size am I looking for?
-
frank_sumner - Transit Aficionado
- Posts: 248
- Joined: Sat Jul 30, 2005 11:05 pm
- Location: Gloucester
by 100ps_drw_hicube » Thu Apr 27, 2006 8:36 pm
19mm spanner size aint it 
You only need two tools in life: WD-40 and Duct Tape. If it doesn't move and it should, use WD-40. If it moves and shouldn't, use the duct tape.
-
100ps_drw_hicube - Transit Abuser!!
- Posts: 4118
- Joined: Tue Sep 06, 2005 6:25 pm
- Location: sussex
by Luke » Thu Apr 27, 2006 11:04 pm
its the taper thats important i THINK its 60 degrees but you need to be 100% sure if not the wheel will come loosefrank_sumner wrote:Errrrr, had a look on Rally Design's website. But what size am I looking for?
prolly best to ring fords and ask them - then buy em from somewhere else
unless someone on here knows for sure!!!
-
Luke - Site Admin
- Posts: 44539
- Joined: Wed Mar 02, 2005 12:53 am
- Location: Rotherham, Yorkshire!!
21 posts
• Page 2 of 2 • 1, 2
Return to Mk 3, 4 & 5 - Second Generation Transits
Who is online
Users browsing this forum: No registered users