Hello
I drive a camper MK4 with long wheel base. The axle is a Salisbury, type 53 heavy execution.
The axle prepares problems, it for me jerk LET with starts.
The cardan shaft has approx. 5 mm loosely at the differential gears transmission.
Now I developed and measured the differential gears transmission. Between the housing and the gear wheel one is slim from original 1.2 mm.
I measure there however one clear ens from 0.30 mm.
The original measure may amount to however only up to 0.15 mm.
Ford supplies only spacers of 1.2 mm thick. New differential gears Case cost however ca.570, - €
Me can someone call an address, where I can buy thicker spacers?
The measure which I need is 46,7x66x1,3 mm, or 46,7x66x0,10 mm then I could occupy the 0.10 mm thick slim on the 1.2 mm.