1999 Instrument Wiring

[utsbrodie]

Hi, new to the forum from downunder.

I wonder if you good people could point me in the right direction for a wiring diagram for the cluster back to the engine?

The cluster has speedo, tacho, fuel, and temp gauges, and oil, temp, alt, fuel warning lights.

I need to trace all engine parameters to the instrument cluster.

Many thanks,

[Fastfish]

As these are non can bus you would prob be easier just using a multi meter to determine what wire goes where, as some of the early models have a very small loom to the engine making life easy

[vanfox]

The wiring diagrams are in the Haynes manual, probably been posted on here at some time.
You mention tacho so I'm guessing you have the Epic turbo motor? It helps if we know what we're talkin' about.

[utsbrodie]

vanfox

The only Haynes manual I could find is for a diesel (3019). Can I assume the instrument wiring will be the same?
I am not near the van, but it is a 2lt petrol, if that helps. I will be seeing the van tomorrow so will more closely ID it.

fastfish

I was hoping to avoid that as nearly all the plugs and wires are covered in black crud.

Cheers,