Electric window+mirror conversions

[Abcd123]

Hi I would like to fit electric windows and mirrors to my van. I’ve read on other threads that it’s possible IF the wiring is there. Please can somebody let me know where the wiring will be so I can check I have it before I was to find and purchase the electric windows ect.

[jamie182]

The wiring, if present will be attached to a small metal plate on the inside of the A post where the lower door hinge bolts onto. If you have a low spec loom the van side of the loom will only have a couple of wires for the door speaker if it's a high spec(what you need) the plug will be almost full of wiring on the van side. You will also gain central locking if you get full door looms and switches ect.
Cause your van is a LHD you will need the parts from a left hand drive mirror glass angles and switches on the doorcard will be wrong

[Abcd123]

Thanks for reply, the van I want to fit the mirrors and windows too is an RHD. The LHD van is not registered in the UK and is just parked up yet.

[Abcd123]

Hi I had a look at the loom and there only 2 words so I assume I have the low spec:( Can someone just confirm I am looking at the right loom and confirm that’s it the low spec.

[jamie182]

yes that is a low spec loom, high spec would have 2 plugs both with lots of wires.

[Abcd123]

Hi, i checked for more plugs/wires today and found these one sub the picture, is this the high spec loom or are these wires for something else. They were a little higher than the previous wiring.

[Abcd123]

Hi please could somebody have a look at the above look, as I would like to have the electric mirrors fitted and don’t want to loose this set as they are rare to come across.

[Abcd123]

Bump//can anybody confirm if this loom in the pictures is the high spec Loom for the doors for electric windows and mirrors

[Abcd123]

Bump//can somebody please check and let me know this look in the attached pictures is the high spec look do ether sores for electric windows and mirrors.

[twin wheel camper]

Not good news I’m afraid the high spec loom will have both the big plugs almost full of wires on the van side of the plug and from that picture yours is a low spec loom.