Lucas eml laser 200p

[powercrazymark]

Hi all my 2.5 di turbo has started bringing on the eml when the revs get about 4000rpm I've plugged it in however there is just along list of codes from over the years that I cant clear. So my question is since this is the van I am going to be relaying on for work does any one in the north east have laser 2000 or fds 2000 or is anyone selling one as if I have an issue I want to beable to sort as soon as to keep me on the road for work.
Many thanks

[Frag]

IDS works with turbo di's too.

[MinorMatt]

My one won't Frag

[powercrazymark]

How much will I be looking at to get ids that works tho

[Altransit]

My one won't Frag

Probably the difference between proper dealer IDS and the Chinese clones

[powercrazymark]

https://rover.ebay.com/rover/0/0/0?mpre ... 2868174719

Would this work?

[Frag]

My one won't Frag

Even if you use the manual vehicle entry option ?
Or the option where you enter pcm part number ?

[MinorMatt]

Unfortunately not.

I can programme keys, but not get fault codes!

[Riggard]

https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F312868174719

Would this work?

Not sure about this specific model of cable, but it is definitely possible to use a cheap cable from eBay and Forscan to read and clear the codes. (depending on the year of your transit)

I did it myself and do not see much use for a laser tool. Described the process here:
viewtopic.php?f=4&t=193098&p=1656707&c=1#p1656707

[ole123]

Has anyone used forscan and a cable from ebay successfully with a MK5? (1999 2.5 TD) need to check and Clear codes

[Halse108]

I used a wifi codereader from tunnelrat electronics (approx 15£) and forscan to read and clear codes on a 1998TD.

[Riggard]

Has anyone used forscan and a cable from ebay successfully with a MK5? (1999 2.5 TD) need to check and Clear codes

yes i did.

[powercrazymark]

How did you set it up I've tried it on mine and cant seem to set it up correctly.

[Riggard]

How did you set it up I've tried it on mine and cant seem to set it up correctly.

Are you sure you've got a ford specific cable (The one with the switch)?

If so, i simply plugged it in forscan and could scan the codes. Maybe you have to flip the switch, but that's it.

[powercrazymark]

Yeah the one I got was the Ford specific one but on the cd there are loads if different programs but I do not think any of them are for scan.