What is the purpose of the two small rings and the two rectangular pads that are included in the oil pan seal set (Pinto 2.0 L)? See photo.
*NOW BOOKED FOR 2024* Transitmania 15 @ Santa Pod 19th to 21st July 2024 *ALL DETAILS HERE*
Purpose of small parts with oil pan seal?
3 posts
• Page 1 of 1
Purpose of small parts with oil pan seal?
by Kjeles » Wed Mar 18, 2020 9:04 am
You do not have the required permissions to view the files attached to this post.
-
Kjeles - Transit Aficionado
- Posts: 142
- Joined: Sun Jun 26, 2016 3:49 pm
- Location: Norway
Re: Purpose of small parts with oil pan seal?
by reevco62 » Wed Mar 18, 2020 10:44 am
Not sure about the black washers / seals, I have two gasket sets in the garage one a cheap set and one a Burtons power set and neather have the seals you have here.... Have you a better photo of them next to a coin for the size comparison
but I can help with the wedges
They fit at the rear crank seal and push in just before fitting the rubber strip
but I can help with the wedges
They fit at the rear crank seal and push in just before fitting the rubber strip
It takes thousands of nuts to hold a Transit together but only one nut behind the wheel to distribute them all over the road...
-
reevco62 - Transit Aficionado
- Posts: 135
- Joined: Wed Jun 17, 2009 6:14 pm
Re: Purpose of small parts with oil pan seal?
by wojciech » Sat Mar 21, 2020 5:32 pm
-
wojciech - Transit Fanatic
- Posts: 2117
- Joined: Mon Aug 02, 2010 12:40 pm
- Location: long way away
3 posts
• Page 1 of 1
Return to Mk 3, 4 & 5 - Second Generation Transits
Who is online
Users browsing this forum: No registered users