dumper wrote:I can’t remember if it’s a special bolt or not but I would remove the rocker shaft and push rods use a pice of cardboard make some holes to put the rods into so you can keep them in the same order to go back in and the get magnet on a sick you can get telescopic ones from tool shops and stick it down all the holes in the head . Usually they land on top of the head and don’t go down into the sump have a good look round it may be still there.
dumper wrote:before you remove it have a good look around it maybe hiding on the top in a recess covered in oil.
mkgld wrote:Hi!!
Trying to solve a really bad issue of white smoke and the van overacerlerating randomly, I am checking some things that the users suggested here.
Now I was doing the valve clrearance and I have found out that there is one bolt of the rocker arm shaft missing and another one totally loose, almost falling.
No Idea where did that missing bolt gone, and that scares me.
But I will need to buy a get one.
Can anyone please tell me where can I check the right size or part number, and where can I buy it?
Thanks!!
dumper wrote:but before you remove it have a good look around it maybe hiding on the top in a recess covered in oil.
V184 wrote:i think there the same dimension (6mm) as the rocker cover bolts?
MinorMatt wrote:Or if you can wait a few days for me to get to the workshop - I will post you a used one
mkgld wrote: If I ever buy another van, will be a transit, just to be part of this familly!
Return to Mk 3, 4 & 5 - Second Generation Transits
Users browsing this forum: Google Adsense [Bot]
This site contains affiliate links for which we may be compensated.