Fuses & Relays - Start Engine

[VG1997]

Hello all from Australia.
I have 1997 (190 Series 2.5 OHV
Diesel. It's had New Timming Belt Kit. was going Perfectly.
Park up for two days. Had lot of rain & water got into this
Box . Won't start winds over . But won't fire.
So was thinking fuse or a Rely ?????
Any knowledge be much appreciated

[meerkatmag]

Try putting a 12v live to the solenoid on the back of the pump, then see if it starts. If that works, you have an electrical issue, just go through the fuse box and check everything with a multi meter, presume you have checked all the fuses are good?

[MinorMatt]

In that box is a brown "power hold" relay. It supplies all power to the engine management system. 1st port of call would be to replace it

[MinorMatt]

Try putting a 12v live to the solenoid on the back of the pump, then see if it starts.

Absolutely do not do that. All you will achieve is a blown solenoid. It runs on a pulse width modulated signal - and even removing the plunger won't let it run

[meerkatmag]

Try putting a 12v live to the solenoid on the back of the pump, then see if it starts.

Absolutely do not do that. All you will achieve is a blown solenoid. It runs on a pulse width modulated signal - and even removing the plunger won't let it run

Oops! Assumed it had a na bosch pump diesel.

[VG1997]

Try putting a 12v live to the solenoid on the back of the pump, then see if it starts. If that works, you have an electrical issue, just go through the fuse box and check everything with a multi meter, presume you have checked all the fuses are good?

Question can tell me or where exactly I should put the live wire Buddy ?

[VG1997]

In that box is a brown "power hold" relay. It supplies all power to the engine management system. 1st port of call would be to replace it

OK thank you . And someone said should be a click sound . I can't here one

[VG1997]

Try putting a 12v live to the solenoid on the back of the pump, then see if it starts.

Absolutely do not do that. All you will achieve is a blown solenoid. It runs on a pulse width modulated signal - and even removing the plunger won't let it run

What you saying the live wire ?? Idea

[VG1997]

In that box is a brown "power hold" relay. It supplies all power to the engine management system. 1st port of call would be to replace it

[VG1997]

In that box is a brown "power hold" relay. It supplies all power to the engine management system. 1st port of call would be to replace it

Another Question. Will Another different sort suit it . After makes one.

[MinorMatt]

Yes thats the one

Yes, nothing particularly special about it.

[VG1997]

Minor matt
Thank you . You was absolutely RIGHT with your first call of Port.
Replace it & fire up straight away. Thank you kindly from Australia