*NOW BOOKED FOR 2026* Transitmania 17 @ Santa Pod 17th to 19th July 2026 *ALL DETAILS HERE*


Lowering MK3

Transit Mk3, 4 & 5(smiley front) Forum. All Transits 1986 - 2000

Lowering MK3

Postby Kelvfoozinda » Sat Jan 02, 2010 9:19 pm

How have you guys lowered you're mk3 transits? Blocks and shorter springs is obvious, but what springs for the front? Is it just a case of getting the grinder and oxy acetaline torch out? Any examples of different ride heights about so I can see a pic? The van is never going to carry anything heavier than my little 350cc motorbike, so I doubt scrubbing would be an issue on standard wheels anyway. Cheers for you're comments, or a push in the direction of threads already cover it (I couldn't find any after 30mins of searching, so gave up!).
Kelvfoozinda
Transit Addict
Transit Addict
 
Posts: 35
Joined: Mon Aug 24, 2009 5:42 pm

Re: Lowering MK3

Postby Luke » Sat Jan 02, 2010 9:30 pm

blocks wont lower it like they do on escorts cos the axle is the other side of the springs :)

decambered rear springs or lower ones made from scratch for the back :D

for the front i cut a coil off mine, 1st one i cut 2 coils off and it was too much about 5-6" off the floor and i value my front spoiler :lol:
User avatar
Luke
Site Admin
 
Posts: 44557
Joined: Wed Mar 02, 2005 12:53 am
Location: Rotherham, Yorkshire!!

Re: Lowering MK3

Postby Kelvfoozinda » Sat Jan 02, 2010 9:34 pm

Fair enough, I was doing the stuff on the front for the MOT the other day but got my mate to change a shock bush on the back so didnt get a close look. Can you buy de-cambered springs or is it a case of getting them done? Any ideas how much it costs? Could you just weld some mountings on the underside of the axle and fit the original spring underneath, might have to get the mig out!
Kelvfoozinda
Transit Addict
Transit Addict
 
Posts: 35
Joined: Mon Aug 24, 2009 5:42 pm

Re: Lowering MK3

Postby Luke » Sat Jan 02, 2010 9:39 pm

bez (on here) bought some new lowered rear ones from owen springs in rotherham i think they were £85 a pair seemed a good price 8)
User avatar
Luke
Site Admin
 
Posts: 44557
Joined: Wed Mar 02, 2005 12:53 am
Location: Rotherham, Yorkshire!!

Re: Lowering MK3

Postby AlanN » Sun Jan 03, 2010 6:45 pm

I still waiting for BrownyV6 to play with his MK3 springs :wink: :wink:
Ford Transit MK3 1989 2.8i V6 Auto Member of the MK3 Massive

R.I.P Kirk Bacon aka Eugene Speed
AlanN
Site Moderator
 
Posts: 14176
Joined: Mon Jan 01, 2007 1:23 pm
Location: Rayleigh Essex

Re: Lowering MK3

Postby Kelvfoozinda » Sun Jan 03, 2010 8:25 pm

I've got to get my mk1 fiesta all welded up and out the workshop, once that's done i'll see about mounting the springs on the wrong side of the axle! hmmm.
Kelvfoozinda
Transit Addict
Transit Addict
 
Posts: 35
Joined: Mon Aug 24, 2009 5:42 pm

Re: Lowering MK3

Postby BROWNYS V6 » Mon Jan 04, 2010 9:06 pm

when i looked into putting axle on top of the springs, i came to the conclusion that there would not be enough room for suspension travel as the top of the axle would be very close to the chassis rail :(
other idea is to decamber the springs,i got a quote of £90 i think to do mine but i sort of gone off the idea at the moment.
i did lower the front just chopped 1 coil off the springs :)
ImageImage
1990 mk3 swb, 2.8 v6 cologne, mk2 escort 2.0 pinto nitrous injected.
User avatar
BROWNYS V6
Transit Fanatic
Transit Fanatic
 
Posts: 2596
Joined: Tue Sep 18, 2007 9:34 pm
Location: HERTFORDSHIRE


Return to Mk 3, 4 & 5 - Second Generation Transits



Who is online

Users browsing this forum: No registered users

This site contains affiliate links for which we may be compensated.