Got a blanking plate for my egr valve on my mk6 2.4 duratec engine
unbolted the 2 nuts which hold a pipe support to the rear of the egr valve,
but noticed the bolts that hold the rear pipe to the egr vavle have some sort of splined/star head on them, any ideas on the tool I require to remove the bolts
*NOW BOOKED FOR 2026* Transitmania 17 @ Santa Pod 17th to 19th July 2026 *ALL DETAILS HERE*
EGR VALE
3 posts
• Page 1 of 1
Re: EGR VALE
by knobby1 » Wed Jul 01, 2015 12:03 am
paulk2702 wrote:Got a blanking plate for my egr valve on my mk6 2.4 duratec engine
unbolted the 2 nuts which hold a pipe support to the rear of the egr valve,
but noticed the bolts that hold the rear pipe to the egr vavle have some sort of splined/star head on them, any ideas on the tool I require to remove the bolts
They're a "Torx" bit...#T30 IIRC...but don't quote me on that...
Probably best to buy yourself a set of Torx bits....you'll need 'em for a lot of other gubbins on the Transit.Lord Knobrot
2008 2.4L RWD 170+PS 6-speed 350 LWB High Roof..."Full Poverty Spec".
When I die, I want to go peacefully in my sleep like my Grandfather, not screaming like the passengers in his car..!
When I die, I want to go peacefully in my sleep like my Grandfather, not screaming like the passengers in his car..!
-
knobby1 - Transit Extremist
- Posts: 18645
- Joined: Tue Oct 21, 2014 1:36 am
- Location: Brisbane, Australia
Re: EGR VALE
by Brains_transit » Wed Jul 01, 2015 1:54 am
An 8mm socket will fit or around about that size and may need a light tap but will work
- Brains_transit
- Transit Extremist
- Posts: 5346
- Joined: Fri Sep 26, 2008 6:42 pm
3 posts
• Page 1 of 1
Return to Mk6 & Mk7 - Third Generation Transits
Who is online
Users browsing this forum: No registered users