First long trip today in my mk7 2.2 140 fwd camper for 6 months. The EML came on after 50 miles not been on before, it’s running ok and switching it off doesn’t clear it.
Egr has a blanking disk with a hole in it and it’s been fitted a long time ago without triggering the light.
Any thoughts?
Thanks, Jeff.
*NOW BOOKED FOR 2024* Transitmania 15 @ Santa Pod 19th to 21st July 2024 *ALL DETAILS HERE*
EML light on.
5 posts
• Page 1 of 1
Re: EML light on.
by knobby1 » Sat May 08, 2021 1:22 am
dethleffs wrote:First long trip today in my mk7 2.2 140 fwd camper for 6 months. The EML came on after 50 miles not been on before, it’s running ok and switching it off doesn’t clear it.
Egr has a blanking disk with a hole in it and it’s been fitted a long time ago without triggering the light.
Any thoughts?
Thanks, Jeff.
A code read is the only way to find out what's going on..
Lord Knobrot
2008 2.4L RWD 170+PS 6-speed 350 LWB High Roof.
When I die, I want to go peacefully in my sleep like my Grandfather, not screaming like the passengers in his car..!
When I die, I want to go peacefully in my sleep like my Grandfather, not screaming like the passengers in his car..!
-
knobby1 - Transit Extremist
- Posts: 15839
- Joined: Tue Oct 21, 2014 1:36 am
- Location: Brisbane, Australia
Re: EML light on.
by dethleffs » Mon May 10, 2021 6:12 pm
P1103 apparently, I’ll give the map sensor a clean when I get home at the weekend.
One life, live it
- dethleffs
- Transit Aficionado
- Posts: 239
- Joined: Mon Mar 09, 2009 9:45 pm
- Location: Sunny Scarborough
Re: EML light on.
by knobby1 » Mon May 10, 2021 8:36 pm
dethleffs wrote:P1103 apparently, I’ll give the map sensor a clean when I get home at the weekend.
P1103 is a MAF sensor fault...not a MAP sensor fault.
P1103 = MAF in range but higher than expected.
Normally caused by a faulty/sticky/blocked EGR.
Lord Knobrot
2008 2.4L RWD 170+PS 6-speed 350 LWB High Roof.
When I die, I want to go peacefully in my sleep like my Grandfather, not screaming like the passengers in his car..!
When I die, I want to go peacefully in my sleep like my Grandfather, not screaming like the passengers in his car..!
-
knobby1 - Transit Extremist
- Posts: 15839
- Joined: Tue Oct 21, 2014 1:36 am
- Location: Brisbane, Australia
Re: EML light on.
by dethleffs » Mon May 10, 2021 10:53 pm
knobby1 wrote:dethleffs wrote:P1103 apparently, I’ll give the map sensor a clean when I get home at the weekend.
P1103 is a MAF sensor fault...not a MAP sensor fault.
P1103 = MAF in range but higher than expected.
Normally caused by a faulty/sticky/blocked EGR.
Lord Knobrot
Ok, thanks. I’ll drive it home at the weekend and see if it returns the fault.
One life, live it
- dethleffs
- Transit Aficionado
- Posts: 239
- Joined: Mon Mar 09, 2009 9:45 pm
- Location: Sunny Scarborough
5 posts
• Page 1 of 1
Return to Mk6 & Mk7 - Third Generation Transits
Who is online
Users browsing this forum: Baffles1982, knobby1