****NOW BOOKED FOR 2022**** Transitmania 13 @Santa Pod 20th 22nd May 2022 ****ALL DETAILS HERE****


Expert help needed 2002 2.0 wont start P1665 P1608 P1664

Transit Mk6 & Mk7 Forum. All Transits 2000 - 2013

Re: Expert help needed 2002 2.0 wont start P1665 P1608 P1664

Postby yyahtzee » Wed Feb 27, 2013 2:08 pm

Have a look around this site http://www.remmington.info/ if i were you i would take it off and send it to him or give him a ring

If you need the tools to take the pump off give me a shout i can lend you mine for a small fee plus a refundable deposit.
yyahtzee
Transit Addict
Transit Addict
 
Posts: 80
Joined: Thu Aug 30, 2012 10:52 am
Location: portsmouth

Re: Expert help needed 2002 2.0 wont start P1665 P1608 P1664

Postby fidget » Tue Dec 01, 2015 6:34 pm

have now read through both posts on this issue. and as you said at the beginning of your other thread.

NO ONE PUTS UP WETHER THEY GOT IT GOING AND WhAT IT WAS.!!!

guess I will keep looking... and this is 2 years later.
my advise may not be right, but I like to give my 10p worth, and an answer even if wrong is nice to see.
Build: 05.03.1992
Series: 100L
Diesel 2.5 (70PS)
5-Speed Manual - MT75
Drive: RHD RWD
Axle: 4.56
Diamond White 73
fidget
Transit Aficionado
Transit Aficionado
 
Posts: 379
Joined: Wed Jun 13, 2012 10:30 am
Location: Luton Bedfordshire

Re: Expert help needed 2002 2.0 wont start P1665 P1608 P1664

Postby jiffyrag » Thu Mar 26, 2020 9:54 am

Just for posterity, as an ametuer with a code 23 problem on my ford transit mk6 I found this thread really useful for checking the wiring coming from the pump.

I only ran into one problem -

'pin 8 of the pump comes out at pin 12 of the computer.'

I think on mine it came out at (roughly) pin 93 or similar (around that area). But other than that it all worked perfectly.
jiffyrag
Transit Addict
Transit Addict
 
Posts: 20
Joined: Tue Mar 24, 2020 5:25 pm

Re: Expert help needed 2002 2.0 wont start P1665 P1608 P1664

Postby filhyp » Sun Jan 03, 2021 12:50 pm

hello I discovered your thread and I wanted to know if you found the causes of your failure
filhyp
Newbie
 
Posts: 4
Joined: Sun Jul 12, 2020 4:44 am

Re: Expert help needed 2002 2.0 wont start P1665 P1608 P1664

Postby knobby1 » Sun Jan 03, 2021 8:23 pm

filhyp wrote:hello I discovered your thread and I wanted to know if you found the causes of your failure


This thread was started ~8 years ago so I suspect your request has fallen on deaf ears. The OP hasn't been on this forum since 2014.

Lord Knobrot
2008 2.4L RWD 170+PS 6-speed 350 LWB High Roof.

When I die, I want to go peacefully in my sleep like my Grandfather, not screaming like the passengers in his car..!
User avatar
knobby1
Transit Extremist
Transit Extremist
 
Posts: 12505
Joined: Tue Oct 21, 2014 1:36 am
Location: Brisbane, Australia

Re: Expert help needed 2002 2.0 wont start P1665 P1608 P1664

Postby mikecurd2005 » Fri Apr 30, 2021 6:59 pm

Anybody else had these codes getting speedo movement looks like its affected by the crank sensor?
mikecurd2005
Transit Addict
Transit Addict
 
Posts: 21
Joined: Sun Aug 23, 2009 1:22 pm

Re: Expert help needed 2002 2.0 wont start P1665 P1608 P1664

Postby mikecurd2005 » Fri Apr 30, 2021 7:38 pm

Fixed mine.

Crank sensor white/red goes to 21 on ECU
grey red goes to 22 on ECU.

Wiring loom had been crushed and getting bad signal because of short should of checked it ages ago with the speedo fluctuations live and learn it the signal eemto correct itsself when fired on a bit of fluid.
mikecurd2005
Transit Addict
Transit Addict
 
Posts: 21
Joined: Sun Aug 23, 2009 1:22 pm

Re: Expert help needed 2002 2.0 wont start P1665 P1608 P1664

Postby filhyp » Sat Jan 15, 2022 2:36 am

Hello Mikecurd2005

where did your wiring harness get crushed?

cordially
filhyp
Newbie
 
Posts: 4
Joined: Sun Jul 12, 2020 4:44 am

Previous

Return to Mk6 & Mk7 - Third Generation Transits



Who is online

Users browsing this forum: Google [Bot]