recently started to develop a rattle when pressing the clutch. Am I right I thinking my van is blessed with a dual mass flywheel?
2010 fwd 2.2 115 6 speed trend mwb
ake wrote:
All 2.2 Euro 5 front and rear wheel drive are DMF
With thanks to taz666 for help in compiling this list
waerhy wrote:recently started to develop a rattle when pressing the clutch. Am I right I thinking my van is blessed with a dual mass flywheel?
2010 fwd 2.2 115 6 speed trend mwb
knobby1 wrote:waerhy wrote:recently started to develop a rattle when pressing the clutch. Am I right I thinking my van is blessed with a dual mass flywheel?
2010 fwd 2.2 115 6 speed trend mwb
They usually rattle with your foot off the clutch in neutral though...not when pressing the clutch.
Is it the release bearing causing your rattle..?? Can you feel it through the clutch pedal..??
Lord Knobrot
waerhy wrote:Just noticed this morning, the rattle only comes on for the first 30mm of travel on the pedal. When fully pressed the sound dissapears
Brettbear63 wrote:just had my DMF replaced , 190,000 miles on the original , it all had a light rust colour on it , I had the rattle noise when the clutch was fully depressed , LUK new parts fitted , the noise has gone , friction plate was still ok but flywheels were toast .
Return to Mk6 & Mk7 - Third Generation Transits
Users browsing this forum: Google Adsense [Bot]
This site contains affiliate links for which we may be compensated.