MK 7) hunting/surging at idle, 2.4 ford transit

[belly]

I've havn't pulled my imv out yet So don't know about that, the manifold generally doesn't as the gaskets are a soft rubber type Remove them from the manifold though prior to cleaning. As for gadgets I use every job as a excuse to buy more gadgets

[blue estate]

I've havn't pulled my imv out yet So don't know about that, the manifold generally doesn't as the gaskets are a soft rubber type Remove them from the manifold though prior to cleaning. As for gadgets I use every job as a excuse to buy more gadgets

Like a 10t press

[blue estate]

How many miles worth of gunk is that Blue

2010 plate at 82k and it's a 140ps

[belly]

I've havn't pulled my imv out yet So don't know about that, the manifold generally doesn't as the gaskets are a soft rubber type Remove them from the manifold though prior to cleaning. As for gadgets I use every job as a excuse to buy more gadgets

Like a 10t press

Nah no need I know a man who has one

[blue estate]

I've havn't pulled my imv out yet So don't know about that, the manifold generally doesn't as the gaskets are a soft rubber type Remove them from the manifold though prior to cleaning. As for gadgets I use every job as a excuse to buy more gadgets

Like a 10t press

Nah no need I know a man who has one

When you do your imv post a pic up of a gunked up 5pot manifold

[loot]

the imv is a straight swap I think and it has an o ring which comes on the new 1, the other gaskets are blue rubber seals which I have found reusable after a little wash, the boss has a new set there that I didn't use as they came after I did the job lol he even bought a new inlet manifold after seeing the gunk in the old 1,I did offer to clean it out, didn't find out how much it was tho

[belly]

I've already stripped it down Blue just not refitted it as I ran out of time My inlet manifold was only slightly gooed up but odd as it was dry so only needed a little scrape then the rest shook out like powder

[blue estate]

I've already stripped it down Blue just not refitted it as I ran out of time My inlet manifold was only slightly gooed up but odd as it was dry so only needed a little scrape then the rest shook out like powder

wierd at least 3 to5 ports should be gunky ,but it does make cleaning it easier and less messy

[limitedblack]

I've already stripped it down Blue just not refitted it as I ran out of time My inlet manifold was only slightly gooed up but odd as it was dry so only needed a little scrape then the rest shook out like powder

wierd at least 3 to5 ports should be gunky ,but it does make cleaning it easier and less messy

I've already stripped it down Blue just not refitted it as I ran out of time My inlet manifold was only slightly gooed up but odd as it was dry so only needed a little scrape then the rest shook out like powder

Does the inlet require a new gasket each time it's cleaned ?

[speedyspeedy]

I've havn't pulled my imv out yet So don't know about that, the manifold generally doesn't as the gaskets are a soft rubber type Remove them from the manifold though prior to cleaning. As for gadgets I use every job as a excuse to buy more gadgets

ok ill get new gaskets for manifolded

[belly]

You can re use as long as they've not perished or gone hard

[blue estate]

One other tip don't clean your manifold in the dishwasher like one member did

[limitedblack]

One other tip don't clean your manifold in the dishwasher like one member did

Don't be silly, I will use the bath

[karl]

a bath you lot are crackers my misses would go mental if I used the bath as a parts washer

[speedyspeedy]

ok so i got the imv out and the manifold wasn't as bad a the one in the pic. but needs a little clean.

so ive ordered of "shebaying" imv £95 and the prv was £55 and new inlet gaskets £25. even lo the old ones don't look perished. new is always better

just to let people know in the future. this was not a hard job and i love that the inlet manifold bolts stay on the manifold so u don't have to worry about

dropping them. nice one ford.

will have to white till parts come in the week and then i will book the ids in at ford thanks again people of the transit
ill update soon as......