What did you do to your mk6/7 today?

[Dale1970]

Bent the rack and gutters Then had to do a dukes of hazard at the job, cos I couldn't get the door open!

Did the same to mine last year court a tree in customers drive. Pulled the roof rack and bent the gutter couldn't open side door had to panel beat it back straight. Hence no roof rack now.

I bet that was a little top heavy or did your pack lunch balance it out

How is the MK7 conversion going.

[Punto443]

Yeah, about a mile down the road I realised it was a stupid idea putting 3/4ton on the roof!

Works gone ballistic lately, so the mk7 fronts stalled until I get some time!

[motorman116]

Bought some more wheel trims, but this time I am going to have the reg number etched into the outer face, so that it can be seen.

I might buy some more wind deflectors and do the same, with etching the reg number into them...

[nscvr6]

tried doing my bottom ball joints but to no avail
heat mahoosive hammer tonn of release spray
and an hour and a half later built back up off t workshop monday

[HARRYSPADGE]

tried doing my bottom ball joints but to no avail
heat mahoosive hammer tonn of release spray
and an hour and a half later built back up off t workshop monday

Only an hour and a half, you didn't try hard enough

[blue estate]

tried doing my bottom ball joints but to no avail
heat mahoosive hammer tonn of release spray
and an hour and a half later built back up off t workshop monday

You need a press otherwise it's hard

[AK]

Spent 8 hours polishing the luton body and bubble today, gonna have to get it resprayed soon

[motorman116]

More goodies



Ive also got this Yellow Red High Intensity Reflective Chequer Checkered Tape Vinyl Roll Mix

[nscvr6]

tried doing my bottom ball joints but to no avail
heat mahoosive hammer tonn of release spray
and an hour and a half later built back up off t workshop monday

Only an hour and a half, you didn't try hard enough

lol thought that was long enough felt like popeye ....
i knew i was flogging a dead horse so work shop monday it is with the press

[blue estate]

I think i killed the Egr as i've got a p1409 and p1402 code come up and i lost power so i unplugged the egr and got most of the power back

[motorman116]

I think i killed the Egr as i've got a p1409 and p1402 code come up and i lost power so i unplugged the egr and got most of the power back

You are a devil for breaking vehicles

[blue estate]

I think i killed the Egr as i've got a p1409 and p1402 code come up and i lost power so i unplugged the egr and got most of the power back

You are a devil for breaking vehicles

I think it got wind that i was getting vantuner to turn it off so it committed harry carry

[ake]

Bought some more wheel trims, but this time I am going to have the reg number etched into the outer face, so that it can be seen.

I might buy some more wind deflectors and do the same, with etching the reg number into them...

That's what I did as well etched the reg number into the face

[ake]

Yeah, about a mile down the road I realised it was a stupid idea putting 3/4ton on the roof!

Works gone ballistic lately, so the mk7 fronts stalled until I get some time!

I bet the handling was interesting with that lot on the roof

[foxy transit]

Bought new injector copper washers and the rubber seals for the rocker cover... all in off ebay £32

So monday night will get injectors out cleaned and all new seals will be fitted with oil change...