What did you do to your mk6/7 today?

[loot]

Bond the floor and if you don't cheap out the weight of the board will weigh it down so no screws

Got screws for nowt gonna silicon then screw, got hammerite too so I'll look at the floor before laying

[Punto443]

Bond the floor and if you don't cheap out the weight of the board will weigh it down so no screws

Got screws for nowt gonna silicon then screw, got hammerite too so I'll look at the floor before laying

Just mind the diesel tanks

[blue estate]

Bond the floor and if you don't cheap out the weight of the board will weigh it down so no screws

Got screws for nowt gonna silicon then screw, got hammerite too so I'll look at the floor before laying

Just mind the diesel tanks

Been there done that

[Brains_transit]

I must be the lucky one that thinks what's under there

[limitedblack]

We have Dolby lift off
Cinema system is go, just need bit of tidying and think about screens, but sound system is done.


Sent from my iPod touch using Tapatalk 2

[Rumble bee]

whats the spec limbak?

[limitedblack]

Hotch pot of bits, but Sony multidisc DVD unit, Sony drop down screen and controller, Panasonic Dolby sound processor. All old stuff, but unused. Then 3 amps, (kenwood), 2 set to 4ch and 1 for the sub. 2 ch set for front doors and new speakers behind front seats, these are set to front channel. Then pair of centre speakers, one on dash and one in centre console. 1 sub under middle row seats, and 1ch for rear speakers, set as rears on Dolby. I used the Panasonic unit as it was a nice simple unit with 1 analogue input (ford head unit), and 1 optical input (DVD player). Runs about 800w RMS, so nice. Spent fair time trying to get levels set, think I'm there now. Just pondering screen possibilities, got a laser projector, but not sure to go that far.


Sent from my iPod touch using Tapatalk 2

[Rumble bee]

No fog machine

Just a small challenge today, make my own franken key

[Punto443]

Got a whopping 11,000miles out the front tyres but now me thinks they need changing

Not bad for a £65 budget tyre?

How's everyone else getting on with there 18's?

[ake]

Got a whopping 11,000miles out the front tyres but now me thinks they need changing

Not bad for a £65 budget tyre?

How's everyone else getting on with there 18's?

Are you running 50 series tyres Morgan?
If so get some Falkens for the next pair

[blue estate]

In the middle of changing bulk head over , just adding some new wires while it's off

[ake]

Going for the super luxury lined bulkhead?

What's the wires for?

[blue estate]

Going for the super luxury lined bulkhead?

What's the wires for?

Yep
1 is a 12v cigi socket 1 is my rear view camera and the other is for rear load area lights

[mealic]

[quote=

What's the wires for?[/quote]

Electric chair

[mealic]

[quote=

What's the wires for?

Electric chair [/quote]

or dent remover