by eddy dar » Fri Sep 21, 2018 8:45 pm
Wondering if someone can help. I'm trying to get the correct timing location on the flywheel on my 2.4 tdci 135 bhp engine. There seems to be 2 or 3 locations quite close together. The tool i have has a smaller diameter pip on the end which is required for the tdci engine. Ive turned engine by hand twice and it seeemed tight injectors fitted. But didnt lock. Im just a bit worried as the locations on the flywheel are quite close and may allow the crank / cams to turn and still do damage.