Am I Missing weather protection Hub covers

[Marauder]

2008 SWB 2.2 fwd, A quick question, now I have replaced rear Hubs,discs etc. It seems strange that the centre of the Hubs either front or rear have no covers over the ends to protect the bearings from the weather ! " Should there be some covers either plastic or Metal that push into the end of the Hubs" to protect from the rain /dirt like what they fitted years ago...…… "Please note I do not mean the black plastic covers that go into the centre of the road wheels."

[v8dave]

They use sealed bearings so a seperate cover is not required.

[ned]

Even though they are not required I am looking for some that fit just to make the hubs look neat and tidy

[Marauder]

If I cant find any I will have a go at turning 4 out of alloy on my Myford Lathe, Interference fit so I can just tap them in the ends,

[andz327]

If I cant find any I will have a go at turning 4 out of alloy on my Myford Lathe, Interference fit so I can just tap them in the ends,

Your wasting yer time fella unless your going seal the inner side at the cv joint face......

ANDZ