Got oil in the charge pipe/ inter cooler pipe

[Mr_JDM]

Hi everyone!
I try to clean the EGR valve and find out oil/carbon in the charge pipe (fr EGR to intercooler) and the inlet pipe from the other end of the intercooler. As well as the intercooler inside got oil as well.
I can clean or change the new pipe but how do we avoid oil in these area in future?
Thanks

[Airthies]

Its usualy from crank case breather.
You can 're route it and put in a "catch can" breather filter which then vents to atmosphere and block the port on the intake. or conect back to intake.
Couple of others on here done it before.
EGR if it's a mk6 just blank it off. Pleanty plates on the web for much cheapness.

Sent from my anu5 using crapatalk

[Mad Husky]

Any recomendations on where to get one local auction place throws up china and the usa and who's used what, not hijacking just curious as been thinking about doing this myself fed up of intercooler pipe having oil over it.

[Mr_JDM]

Its usualy from crank case breather.
You can 're route it and put in a "catch can" breather filter which then vents to atmosphere and block the port on the intake. or conect back to intake.
Couple of others on here done it before.
EGR if it's a mk6 just blank it off. Pleanty plates on the web for much cheapness.

Sent from my anu5 using crapatalk

Thanks. My van is 2005 VJ deisel MK6. Did you mean to blank if Off and no need to "catch can" ? Or do both ?

[ned]

Any recomendations on where to get one local auction place throws up china and the usa and who's used what, not hijacking just curious as been thinking about doing this myself fed up of intercooler pipe having oil over it.

A blanking plate or catch can?

[ned]

Its usualy from crank case breather.
You can 're route it and put in a "catch can" breather filter which then vents to atmosphere and block the port on the intake. or conect back to intake.
Couple of others on here done it before.
EGR if it's a mk6 just blank it off. Pleanty plates on the web for much cheapness.

Sent from my anu5 using crapatalk

Thanks. My van is 2005 VJ deisel MK6. Did you mean to blank if Off and no need to "catch can" ? Or do both ?

Do both, I have

[Mr_JDM]

Not too sure about the "catch can"
Is there any video, link to order parts ...
Thanks

[ned]

This is the one I have
https://www.ebay.co.uk/itm/Aluminum-Oil ... SwC9VZgE~0

[Mad Husky]

This is the one I have
https://www.ebay.co.uk/itm/Aluminum-Oil ... SwC9VZgE~0

How easy was it to mount it in the area near the turbo.

[ned]

This is the one I have
https://www.ebay.co.uk/itm/Aluminum-Oil ... SwC9VZgE~0

How easy was it to mount it in the area near the turbo.

I mounted mine on the slam panel, takes about 5 minutes to fit, you will need a 16mm I/D pipe to fit on the rocker cover to the catch can, I bought a meter for 2 sovs, then either vent back to the engine or to the atmosphere.

I fitted a small breather filter to the inlet pipe where it would have gone on to the rocker cover.

I'll get a picture in a minute.

[Mr_JDM]

This is the one I have
https://www.ebay.co.uk/itm/Aluminum-Oil ... SwC9VZgE~0

How easy was it to mount it in the area near the turbo.

I mounted mine on the slam panel, takes about 5 minutes to fit, you will need a 16mm I/D pipe to fit on the rocker cover to the catch can, I bought a meter for 2 sovs, then either vent back to the engine or to the atmosphere.

I fitted a small breather filter to the inlet pipe where it would have gone on to the rocker cover.

I'll get a picture in a minute.

Thank you so much. Can u post some photos with a brief instructions of how u install/running this setup.
That would be great.

[Mr_JDM]

In reg the OCc can someone pls confirm that we need to routing the line as per photo attatched with red marked?
My van is the 2005 MK6
Thanks

[Mr_JDM]

Hi, can someone help me.

[Mr_JDM]

In reg the OCc can someone pls confirm that we need to routing the line as per photo attatched with red marked?
My van is the 2005 MK6
Thanks

need help please (