MK7 Transit instrument cluster problems

[MajorMarkLittle]

So when I start it mostly first thing in the morning, the following happens,

https://youtu.be/LSCmv9AxB8E

Above is a you tube video of it,

The van starts and I get no movement from any of the dials, revs, fuel, speedo and temperature, also no response from the throttle.
Turn it off and back on and it works, sometimes, I have to do this 3 or 4 times

Any help would be welcomed thanks in advance

Sent from my SM-G930F using Tapatalk

[huaweipro201]

So when I start it mostly first thing in the morning, the following happens,

https://youtu.be/LSCmv9AxB8E

Above is a you tube video of it,

The van starts and I get no movement from any of the dials, revs, fuel, speedo and temperature, also no response from the throttle.
Turn it off and back on and it works, sometimes, I have to do this 3 or 4 times

Any help would be welcomed thanks in advance

Sent from my SM-G930F using Tapatalk

Have you checked the wires at the back of the cluster itself? If you wriggle them it may work if so you had a bad connection.

Sent from my LYA-L09 using Tapatalk

[knobby1]

Ignition switch is my guess.

Lord Knobrot

[TripleSix]

Mine did this, along with lighting up every warning light.

I hit the top of the dashboard as hard as I could with my fist and it was never a problem again