Front Brake Discs RWD 2.4 MK7 2010

[UncleNobbs]

Hi All, I would very much appreciate some advice. I have a 2010 RWD 2.4 MK7 with twin rear wheels and will be replacing the front Discs. Does anyone know if the discs are the same as the single wheel RWD versions as it's not clear when trying to order them. Also is the method the same as the single rear wheels, for example remove the 50TX bolts and inset M10 bolts from the rear to separate the assembly from the hub carrier. Any advice will be very much appreciated. Thanks UN

[karl]

i believe the front discs are different on the twin wheel axle,also you will have to remove the whole back hub and remove the abs ring with heat and heating will damage the rear oil seal so that will need replacing,

best of look with getting the front wheel bearing out of the hub