Ford transit 2008 2,2 96 kw. Bad starting?!?

[raidopajur]

Hello guys.

Can anybody help me?

I have ford transit 2008 2,2 96 kw and i have bad starting. Can anybody give me some good advise what i need to chek more?.

So i have done.
New starter.
Brand new injectors,
New timing chain
New glow plugs.
Rebuilded enging and valve seats.

Help?

[knobby1]

Have you done SCV & PRV....EGR...software update....were the new injectors coded in and a complete set of learns done etc...??

Lord Knobrot

[davyjcb]

Does it run OK when it finally starts?
Is it hunting?
When it's running does it have diesel knock when cold and /or lack of power?
If the answers are no and there are no dtc codes try an ignition switch

[raidopajur]

Have you done SCV & PRV....EGR...software update....were the new injectors coded in and a complete set of learns done etc...??

Lord Knobrot

Yes . Evrything done.

[raidopajur]

Does it run OK when it finally starts?
Is it hunting?
When it's running does it have diesel knock when cold and /or lack of power?
If the answers are no and there are no dtc codes try an ignition switch

Evrything is ok if its starts. And no dtc codes

[knobby1]

Have you done SCV & PRV....EGR...software update....were the new injectors coded in and a complete set of learns done etc...??

Lord Knobrot

Yes . Evrything done.

If all the learns etc...were "completed successfully", it should be starting and running fine.

Crank sensor not happy??

Lord Knobrot

[raidopajur]

Have you done SCV & PRV....EGR...software update....were the new injectors coded in and a complete set of learns done etc...??

Lord Knobrot

Yes . Evrything done.

If all the learns etc...were "completed successfully", it should be starting and running fine.

Crank sensor not happy??

Lord Knobrot

Cranck sensor is new.
camshaft and camshaft is synchronizer
yes it should be starting but its still bad starting.
if it start it run good.

[Altransit]

try an ignition switch

[raidopajur]

try an ignition switch

I will try. Thanks