Lifting a MK6

[Joe in Oz]

Finally made and fitted a liftkit to our Mk6: 40mm at the front (top of McPherson strut spacer) and 50mm at the rear (50x60 fabricated steel spacer blocks).
Made no noticable difference in handling and gives great ground clearance.

Sent from my WP5 Pro using Tapatalk

[ossie cossie]

Hi im in Oz as well, did you make them yourself or buy them over here looking at getting some for mine.

[Joe in Oz]

I made them myself on a lathe from a solid bar. Then drilled 3 holes in each flange, tapped one side for M8 studs and the other for the McPherson studes to clear.
Not a difficult job...

Sent from my WP5 Pro using Tapatalk

[ossie cossie]

thanks for the info.

[Retired John]

I got similar results but with the added advantage of now having camber and caster adjustments on the front struts with these The new coi;ls gave a 30ml lift as well , the rear I simply replaced the old parabolic s with 10 leaf progressive leaves and a 30ml block extra in the passenger side rear to level the rear and help alignment

SDC12014.JPG

SDC12015.JPG

70212076_1662569963876243_3158617317114380288_n.jpg