Rear number plate bulb removal

[Project2c]

Hi guys searched the forum and can't find any info on this, how do you get the bulbs out of the black casing? Thanks in advance.

[Brains_transit]

Prise the cover of the outside using a suitable screw driver and then pull the bulb out.

[ductman33]

fairly large flat blade screwdriver.
insert it into to slot under the black cover look under neath it bit of gentle upward pressure and it should come of
you`ll prbably find the cover full of road dirt quick wash out with a brush.
bulbs just pull out.
when refitting make sure you put the top on first then push the bottom home they do have an annoying habbit of falling off

[Project2c]

Thanks guys.

[Chris bash]

How do you remove replace broken lamp holder please

[scas]

How do you remove replace broken lamp holder please

take inner panel of door and squeeze the clips on the holders or if its broken anway, force it out from the outside with a flat screwdriver