ABS problem

[westers]

just changed the front wheel bearing again ABS one, but my ABS light is still on

if i turn the engine off and on again and drive at less than 14mph the light will go off and stay off. but as soon as i go over 15mph it comes back on and stays on untill i turn the engine off again.

i guess the next step is to get a new ABS sensor and try that? as the module is mega money :/

any help would be great

[electric]

Did you fit the wheel bearing the correct way round, when the sensor is faulty you tend to find the light stays on all the time

[westers]

bearing is definatly the right way around, had a mechanic check it and mark the ABS side, well i hope it is

im sure it is, because with the old bearing the light was constantly on (think that was a non ABS one) and now this one it does go off untill 15mph

[electric]

You need to get the fault codes then, if you want to take a gamble the sensors aren't expensive from euro car parts.

[westers]

i had the codes rear this morning before i swaped the bearing ... should have mentioned that sorry... and it rear front right no signal ? which we assumed ment the sensor wasent getting a signal meaning the wheel bearing was at fault?