valetech new project

[paul2012]

Do it red, maybe you've got some handy

sick of red now,when you coming down?

anyway,this what happened



didnt break the side skirt

By the look of that you were lucky it didn't pull you off the road.

[GKandR4CH]

Repaint your van? I think you need to finish our van off!! Front arch is hanging off, front splitter doesn't line up any more. Rear quarter trims don't line up, rear bumper top trim pops out at the ends. No reverse sensors, towbar wiring has to be completely redone. And it's the wrong colour!!!! List goes on and on. You've lost heart? I wish he'd never even started this respraying nonsense. It's gonna cost him upwards of £700.00 to finish it off. I'm embarrassed to even unlock the van!!

[Mylee]

Do it red, maybe you've got some handy

sick of red now,when you coming down?

Your call, when the bits are ready. Saturday this week is good, Sunday at a push, but must be home by 5 as I'm on nights. Failing that the following weekend?

[GKandR4CH]

Not impressed Rach.

[Brains_transit]

Low life mother f***

[Drizz]

Does that mean you have an old dash available?

[valetech]

had some spare time to day.



if you havent already guessed this is the new colour of the van


going to change the colour of the dash and doorcards to match the rooflining

[Drizz]

That reminds me i need to come get that dash! Im off this coming week so ill try get over!

[Brains_transit]

Nice work on the dash etc looks

[paul2012]

It like the colour

I see that you have also, modified the dash to get your original instrument cluster to fit

[valetech]

well spotted paul.yep made my old clocks fit,very quick and simple to do
i just dont have the time to have the van off the road to workout to do the new clocks,time is money

doing it this way hopefully means i just need the GEM module for the hazards,unless you know otherwise

paul please can you post up or send me a clearer wiring diagram of the GEM module? would be most gratefull

[GKandR4CH]

Don't hold your breath Paul.

[paul2012]

well spotted paul.yep made my old clocks fit,very quick and simple to do
i just dont have the time to have the van off the road to workout to do the new clocks,time is money

doing it this way hopefully means i just need the GEM module for the hazards,unless you know otherwise

paul please can you post up or send me a clearer wiring diagram of the GEM module? would be most gratefull

Yes no problem, you can download it in high res here http://s1074.beta.photobucket.com/user/ ... e.jpg.html

Select options & then download

The pinouts on the hazard switch is :-

Pin 4 BK/OG to GEM module connector IPR16 Pin 16
Pin 5 OG/GN Illumination circuit
Pin 6 BK/0G GND

[valetech]

Thanks paul,will take a look tonight when I get in.
Was in my ford dealer today picking some bits up and was able to get the wiring diagrams
For GEM module and instrument cluster.mine are showing connectors blue and grey in the diagram like my wiring harness

[paul2012]

Thanks paul,will take a look tonight when I get in.
Was in my ford dealer today picking some bits up and was able to get the wiring diagrams
For GEM module and instrument cluster.mine are showing connectors blue and grey in the diagram like my wiring harness

Could please post or send me the wiring diagram you have for the instrument cluster ?

Thanks